G122-829-001伺服放大器 PDF资料
1.产 品 资 料 介 绍：
G122-829-001 伺服放大器用于驱动和控制伺服电机，适用于精密定位与速度控制场景。
中间15条
采用工业级功率模块，输出稳定可靠。
支持位置、速度、转矩三种控制模式。
内置过流、过压、过热保护电路。
可接收差分或单端编码器反馈信号。
控制精度高，适合精密运动场合。
具备短路保护与缺相检测功能。
支持外部模拟量或脉冲方向控制。
采用自然冷却或强制风冷散热。
输入电源范围宽，适应不同电压等级。
响应速度快，动态性能良好。
体积紧凑，便于机柜安装。
具备故障报警输出端口。
支持使能、复位等外部控制信号。
抗振动设计，适应工业现场。
可通过拨码开关或软件进行参数设置。
结尾
使用 G122-829-001 时，请确认电机与放大器匹配，并注意接地与散热，确保长期稳定运行。
G122-829-001伺服放大器 英文介绍
G122-829-001 servo amplifier is used to drive and control servo motors, suitable for precision positioning and speed control scenarios.
15 in the middle
Adopting industrial grade power modules, the output is stable and reliable.
Supports three control modes: position, speed, and torque.
Built in overcurrent, overvoltage, and overheat protection circuits.
Can receive feedback signals from differential or single ended encoders.
High control accuracy, suitable for precision motion scenarios.
Equipped with short-circuit protection and phase loss detection functions.
Support external analog or pulse direction control.
Natural cooling or forced air cooling is used for heat dissipation.
Wide input power range, suitable for different voltage levels.
Fast response speed and good dynamic performance.
Compact in size, convenient for cabinet installation.
Equipped with a fault alarm output port.
Support external control signals such as enable and reset.
Anti vibration design, suitable for industrial sites.
Parameter settings can be made through dip switches or software.
ending
When using G122-829-001, please confirm that the motor is matched with the amplifier, and pay attention to grounding and heat dissipation to ensure long-term stable operation.
G122-829-001伺服放大器 产品展示
3.其他产品
DCS800-S02-0680-04/05直流调速器
A-B 80026-976-01-R直流电源模块
NI PXI-5610转换器模块
COMPRESSOR MCP-1004 Programmable Logic Controller
Contrex 3200-1677 driver module
DALSA CR-GENO-M6400R3 Industrial Camera
| IC3600SAHD1A | 531X207LCSACG1 | IC3600EPZU1A |
| IC3600SAHD1 | 531X199SPTADG1 | IC3600EPZU1 |
| IC3600SAHC1A | 531X199SPTACG1 | IC3600EPSY1K1C |
| IC3600SAHC1 | 531X197SSAACG1 | IC3600EPSY1J1D |
| IC3600QSPA252A122A | 531X196DFAADG1 | IC3600EPSY1E |
| IC3600QSPA122A103A | 531X196DFAACG1 | IC3600EPSY1A |
| IC3600QSPA104B105B | 531X191RTBALG4 | IC3600EPSY1 |
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs
