Ansaldo VECON 5.602.0 电源励磁系统 PDF资料
1.产 品 资 料 介 绍：
专为电机设计：专为工业同步电机或直流电机励磁设计，保障磁场稳定建立。
高电流输出能力：输出电流大且连续可调，适配不同功率等级的电机。
快速励磁响应：控制响应速度快，满足电机起动、调速及无功调节需求。
恒流与强励功能：具备恒流励磁模式，并能在电网波动时提供短时强励支持。
完善的保护机制：集成过流、过压、失磁及转子接地等保护，提升系统安全性。
可控硅整流技术：采用三相全控或半控桥式整流，转换效率高且控制精度好。
与调速器联动：通常配合Ansaldo传动控制器使用，通过模拟或总线信号给定。
独立供电结构：通常包含独立的整流变压器或进线电抗器，抗干扰能力强。
工业级散热设计：采用风冷或强迫风冷结构，适应高粉尘、高温工业环境。
冗余接口支持：具备冗余的启停及监控接口，方便接入DCS或上位机系统。
故障记录与诊断：内置故障记忆功能，便于排查失磁或过流等历史报警。
标准化柜体结构：采用标准工业机柜安装，便于现场布局与维护。
模拟量给定调节：支持0-10V、4-20mA等标准信号调节励磁电流大小。
高防护等级：柜体及PCB板面通常喷涂防潮防腐涂层，适应恶劣工况。
模块化功率单元：功率部分采用模块化设计，维修时只需更换特定组件。
总之，Ansaldo VECON 5.602.0 是一款输出稳定、保护齐全的工业电源励磁系统，适用于需要精确磁场控制的传动场合。
Ansaldo VECON 5.602.0 电源励磁系统 英文介绍
Specially designed for motors: specifically designed for excitation of industrial synchronous motors or DC motors to ensure stable magnetic field establishment.
High current output capability: The output current is large and continuously adjustable, suitable for motors of different power levels.
Fast excitation response: The control response speed is fast, meeting the requirements of motor starting, speed regulation, and reactive power adjustment.
Constant current and strong excitation function: It has a constant current excitation mode and can provide short-term strong excitation support during power grid fluctuations.
Comprehensive protection mechanism: integrating overcurrent, overvoltage, demagnetization, and rotor grounding protection to enhance system safety.
Controllable silicon rectification technology: using three-phase fully controlled or semi controlled bridge rectification, with high conversion efficiency and good control accuracy.
Linkage with speed controller: usually used in conjunction with Ansaldo transmission controller, given through analog or bus signals.
Independent power supply structure: usually includes independent rectifier transformers or incoming reactors, with strong anti-interference ability.
Industrial grade heat dissipation design: adopting air-cooled or forced air-cooled structure, suitable for high dust and high temperature industrial environment.
Redundant interface support: It has redundant start stop and monitoring interfaces, making it easy to connect to DCS or upper computer systems.
Fault recording and diagnosis: Built in fault memory function, easy to troubleshoot historical alarms such as demagnetization or overcurrent.
Standardized cabinet structure: Installed using standard industrial cabinets for easy on-site layout and maintenance.
Analog given adjustment: supports standard signal adjustment of excitation current size such as 0-10V, 4-20mA, etc.
High protection level: The cabinet and PCB surface are usually sprayed with moisture-proof and anti-corrosion coatings to adapt to harsh working conditions.
Modular power unit: The power part adopts modular design, and only specific components need to be replaced during maintenance.
In summary, Ansaldo VECON 5.602.0 is an industrial power excitation system with stable output and complete protection, suitable for transmission applications that require precise magnetic field control.
Ansaldo VECON 5.602.0 电源励磁系统 产品展示
3.其他产品
WOODWARD 8406-121 EGCP-2控制器
TRICONEX MP3009主处理器模块
IS420UCSCH1B四核控制器
60-0038-00 Communication Module
61-0475-12 Axis Control Module
Radios 148438-001 Interface Board Module
| PMA21B-01100-00 | ANAT 0100-76091 | PFRL101A |
| PMA21B-00100-00 | AMAT 0100-00985 | PFTL 101BER-2.0KN |
| PMA13B-00100-01 | AMAT 0100-00156 | PFTL101A-2.0KN 3BSE004172R1 2.0KN |
| PMA13B-00100-00 | AMAT 0100-20097 | PFEA111-IP65 3BSE050090R65 |
| PMA12A-10100-00 | AMAT 0100-00047 | PFTL 201C-20.0KN |
| PMA11A-01100-01 | AMAT 0100-02167 | PFTL 201D-50.0KN |
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs
