Silicon Graphics 80089A传感器晶圆板  PDF资料 

1.产 品 资 料 介 绍：

Silicon Graphics 80089A 传感器晶圆板采用高精度半导体工艺设计，专为传感阵列集成提供稳定信号采集与传输基础。

中间（15条）：

1. 中间区域配置 15 条并行传感信号通道。

2. 通道间距均匀，利于多点信号同步采集。

3. 晶圆板基材热膨胀系数低，适配多种封装工艺。

4. 表面钝化层耐化学腐蚀，提升环境适应性。

5. 信号线采用低电阻金属材料，减少传导损耗。

6. 绝缘层厚度经过优化，降低寄生电容影响。

7. 适用于压力和温度分布检测等传感器阵列场景。

8. 兼容自动探针台与标准晶圆测试接口。

9. 15 条通道可独立标定，便于系统校准。

10. 边缘设计有对准标记，方便光刻与切割定位。

11. 工作温度范围宽，支持 -40°C 至 +125°C 应用。

12. 接触焊盘采用镍钯金工艺，可焊性与耐磨性良好。

13. 晶圆整体翘曲度小，利于后续贴片与绑定。

14. 符合 RoHS 环保要求，不含铅及其他受限物质。

15. 每条通道之间屏蔽结构有效抑制串扰干扰。

结尾：
综上，Silicon Graphics 80089A 传感器晶圆板以中间 15 条通道为核心结构，兼顾信号完整性与工艺兼容性，适用于高密度传感集成方案。

Silicon Graphics 80089A传感器晶圆板  英文介绍

The Silicon Graphics 80089A sensor wafer is designed with high-precision semiconductor technology, providing a stable signal acquisition and transmission foundation for sensor array integration.

Middle (15 items):

Configure 15 parallel sensing signal channels in the middle area.

The channel spacing is uniform, which is conducive to synchronous acquisition of multi-point signals.

Crystal disk substrate has a low coefficient of thermal expansion and is suitable for various packaging processes.

The surface passivation layer is resistant to chemical corrosion and enhances environmental adaptability.

The signal line is made of low resistance metal material to reduce conduction loss.

The thickness of the insulation layer has been optimized to reduce the impact of parasitic capacitance.

Suitable for sensor array scenarios such as pressure and temperature distribution detection.

Compatible with automatic probe stations and standard wafer testing interfaces.

15 channels can be independently calibrated for system calibration.

The edge design has alignment marks for easy lithography and cutting positioning.

Wide working temperature range, supporting applications from -40 ° C to+125 ° C.

The contact pad adopts nickel palladium gold technology, which has good solderability and wear resistance.

The overall warpage of the wafer is small, which is conducive to subsequent surface mounting and bonding.

Compliant with RoHS environmental requirements, free from lead and other restricted substances.

The shielding structure between each channel effectively suppresses crosstalk interference.

ending:

In summary, the Silicon Graphics 80089A sensor wafer has a central 15 channel core structure, which balances signal integrity and process compatibility, making it suitable for high-density sensor integration solutions.

Silicon Graphics 80089A传感器晶圆板  产品展示   

3.其他产品

1TGE120021R0010 控制单元
IS220PSVOH1A 伺服接线板
PM891 3BSE053240R1 处理器模块

4.其他英文产品

EXP-VID-B Video Card
61-0154-22 Video Control Card
EPC-27 Pcb Circuit Board

本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs