RTEMP8/16控制器模块 PDF资料
1.产 品 资 料 介 绍：
BERGHOF RTEMP8/16 是德国BERGHOF品牌推出的一款工业级多通道温度测量与控制模块，适用于加热设备温控、多点温度监测等场景。
中间15个特点
RTEMP8/16 支持8路或16路温度通道独立采集，可按需选择。
该模块兼容PT100/PT1000热电阻和J/K/T/E/N/R/S型热电偶。
RTEMP8/16 测量范围覆盖-200℃至+1250℃，适应宽温域场景。
采用24位高精度A/D转换芯片，测量精度达±0.1℃（热电阻）。
通道间电气隔离设计，抗干扰能力强，适合工业现场。
RTEMP8/16 支持4-20mA、0-10V等多种输入控制信号。
内置断线检测、超量程诊断和阈值报警功能，便于故障排查。
防护等级达IP65/IP67，防尘防水，适用于恶劣环境。
工作温度范围-40℃至+85℃，宽温设计稳定性高。
配备RS485接口，支持Modbus RTU协议，可与PLC/DCS系统集成。
同时支持Modbus TCP协议，通过以太网接口实现远程监控。
可选配PROFIBUS-DP、CANopen等工业总线协议。
采用模块化设计，支持DIN导轨安装，便于系统扩展。
RTEMP8/16 内置冷却风扇自动启停功能（55℃启动，45℃停止），优化散热。
每通道可独立配置传感器类型和报警阈值，灵活适应不同测温点。
结尾
BERGHOF RTEMP8/16 凭借多通道采集、宽温高防护设计以及灵活的通信集成能力，成为冶金熔炉、冷链仓储、化工反应釜等工业温度监测场景的可靠选择。
RTEMP8/16控制器模块 英文介绍
BERGHOF RTEPM8/16 is an industrial grade multi-channel temperature measurement and control module launched by the German BERGHOF brand, suitable for heating equipment temperature control, multi-point temperature monitoring and other scenarios.
15 characteristics in the middle
RTEPM8/16 supports independent collection of 8 or 16 temperature channels, which can be selected as needed.
This module is compatible with PT100/PT1000 thermistor and J/K/T/E/N/R/S thermocouple.
RTEPM8/16 has a measurement range covering -200 ℃ to+1250 ℃, suitable for wide temperature range scenarios.
Using a 24 bit high-precision A/D conversion chip, the measurement accuracy reaches ± 0.1 ℃ (thermal resistance).
The electrical isolation design between channels has strong anti-interference ability and is suitable for industrial sites.
RTEPM8/16 supports multiple input control signals such as 4-20mA and 0-10V.
Built in wire breakage detection, over range diagnosis, and threshold alarm functions for easy troubleshooting.
The protection level reaches IP65/IP67, dustproof and waterproof, suitable for harsh environments.
The working temperature range is -40 ℃ to+85 ℃, and the wide temperature design has high stability.
Equipped with RS485 interface, supports Modbus RTU protocol, and can be integrated with PLC/DCS systems.
Simultaneously supporting Modbus TCP protocol, remote monitoring is achieved through Ethernet interface.
Industrial bus protocols such as PROFIBUS-DP and CANopen can be optionally selected.
Adopting modular design, supporting DIN rail installation for easy system expansion.
RTEPM8/16 has a built-in automatic start stop function for the cooling fan (starting at 55 ℃ and stopping at 45 ℃), optimizing heat dissipation.
Each channel can independently configure sensor types and alarm thresholds, flexibly adapting to different temperature measurement points.
ending
BERGHOF RTEPM8/16, with its multi-channel acquisition, wide temperature and high protection design, and flexible communication integration capabilities, has become a reliable choice for industrial temperature monitoring scenarios such as metallurgical furnaces, cold chain storage, and chemical reaction vessels.
RTEMP8/16控制器模块 产品展示
3.其他产品
ALSTOM DFI-150-0003 电压测量板
WESTINGHOUSE 1C31201G01 可编程控制系统
YOKOGWA ADV569-P00 数字输出模块
EXM-17 adapter module
44308902 IO Circuit Board
Radios 067-11217-0001 Control Board Card
| PC844-XYZ-A |  6SC6100-0NA11 | MC-TDIY22 |
| PC844-001-T | 6SC6110-3AA00 | Honeywell |
| PC844-001-N | 6SC6110-0EH02 | MC-GAIH92 |
| PC844-001-F | 6SC6108-0SG02 | MC-GAIH84 |
| PC844-001-A | 6SC6000-0NA02 | MC-GAIH83 |
| PC843-XYZ-T | 6SC6140-0FE01 | MC-GAIH22 |
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs
