IC698CPE020以太网控制器模块 PDF资料
1.产 品 资 料 介 绍：
GE IC698CPE020 是通用电气（GE）PACSystems RX7i 系列的高性能中央处理器模块，集成双以太网口，专为复杂工业自动化系统设计。
中间15个特点
IC698CPE020 采用700MHz Pentium III浮点微处理器，运算能力强。
该模块支持多任务处理，可同时运行多个控制程序。
IC698CPE020 具备10MB RAM和10MB非易失性闪存，掉电数据不丢失。
布尔指令扫描速度达0.14ms/K，满足毫秒级控制需求。
该模块内置2个10/100Mbps以太网口，支持网络通信。
IC698CPE020 同时支持Modbus TCP、EtherNet/IP、SRTP等多种协议。
该模块还配备2个RS-232/RS-485串行端口。
IC698CPE020 支持梯形图、结构化文本、C语言等多种编程方式。
该模块支持最多32K离散I/O点和32K模拟字。
工作温度范围为0℃至60℃，适应标准工业环境。
IC698CPE020 采用工业级设计，抗干扰能力强。
该模块支持VME背板扩展，灵活添加I/O模块。
IC698CPE020 内置故障检测和诊断功能。
该模块可与Proficy Machine Edition软件配合使用。
支持远程监控和诊断，便于维护。
结尾
GE IC698CPE020 凭借700MHz处理器、双以太网通信和多协议支持能力，成为生产线控制、机器人控制、过程控制等复杂工业场景的核心控制器。
IC698CPE020以太网控制器模块 英文介绍
GE IC698CPE020 is a high-performance central processing unit module from General Electric's (GE) PACSystems RX7i series, integrating dual Ethernet ports and designed specifically for complex industrial automation systems.
15 characteristics in the middle
The IC698CPE020 uses a 700MHz Pentium III floating-point microprocessor with strong computing power.
This module supports multitasking and can run multiple control programs simultaneously.
IC698CPE020 has 10MB RAM and 10MB non-volatile flash memory, and data is not lost in case of power failure.
The Boolean instruction scanning speed reaches 0.14m/K, meeting millisecond level control requirements.
This module has 2 built-in 10/100Mbps Ethernet ports and supports network communication.
IC698CPE020 supports multiple protocols including Modbus TCP, EtherNet/IP, SRTP, etc.
The module is also equipped with two RS-232/RS-485 serial ports.
IC698CPE020 supports various programming methods such as ladder diagrams, structured text, and C language.
This module supports up to 32K discrete I/O points and 32K analog words.
The working temperature range is from 0 ℃ to 60 ℃, suitable for standard industrial environments.
IC698CPE020 adopts industrial grade design with strong anti-interference ability.
This module supports VME backplane expansion and allows for flexible addition of I/O modules.
IC698CPE020 has built-in fault detection and diagnostic functions.
This module can be used in conjunction with Proficy Machine Edition software.
Support remote monitoring and diagnosis for easy maintenance.
ending
The GE IC698CPE020, with its 700MHz processor, dual Ethernet communication, and multi protocol support capabilities, has become the core controller for complex industrial scenarios such as production line control, robot control, and process control.
IC698CPE020以太网控制器模块 产品展示
3.其他产品
Bently 3500/22M 146031-02 超速检测模块
ALSTOM DFI-150-0003 电压测量板
WESTINGHOUSE 1C31201G01 可编程控制系统
EPC5-33-00-UI Bus Module
060-03847-0001 Fiber Optic Interface Board
EXM-17 adapter module
| PCE835-XYZ-T |  6SC6103-0SE31 | MC-TAIH52 |
| PCE835-XYZ-N | 6SC6100-0GE01 | MC-TAIH53 |
| PCE835-XYZ-A | 6SC6101-3B-Z | MC-TAIH62 |
| PCE835-001-T | 6SC9711-0BM0 | MC-PDOY22 80363975-150 |
| PCE835-001-N | 6SC6101-4A-Z | MC-PD1X02 |
| PCE833-001-T | GESPAC PIA-2A | MC-TAIL02 |
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs
