TRICONEX ENOII 3006 输入输出模块  PDF资料 

1.产 品 资 料 介 绍：

TRICONEX 3006 是 Triconex 安全仪表系统（SIS）中的核心主处理器模块，负责执行安全逻辑、处理 I/O 数据及系统管理，采用三重模件冗余（TMR）架构设计，适用于石油天然气、化工、电力、制药等高安全性关键控制领域。

1. 采用三重模件冗余（TMR）架构，三个独立处理器并行运行，通过硬件投票机制确保单点故障不影响系统运行

2. 内置三个独立 Intel 80486SX 处理器，搭载 32 位 RISC 架构，配备 128MB 内存与 2MB 非易失性存储器

3. 通过 TÜV 认证，符合 IEC 61508 国际安全标准，达到 SIL 3 安全完整性等级

4. 支持 24V DC 输入电压，工作温度范围 -40°C 至 +70°C，存储温度 -40°C 至 +85°C

5. 防护等级 IP20，适用于封闭式控制柜内安装，适应化工厂、变电站等恶劣环境

6. 支持热插拔功能，可在系统运行状态下更换故障模块，减少停机时间

7. 典型扫描周期 ≤100 ms，故障安全响应时间小于 1 微秒，满足安全联锁快速响应需求

8. 支持 Modbus TCP/IP、Modbus RTU（RS-485）、以太网、HART 等多种通信协议

9. 支持 TriNet 冗余通信总线及 TSAA 点对点通信，兼容 DDE、OPC 等上位机监控协议

10. 内置实时自检与故障诊断功能，可监测 90% 以上的潜在故障风险

11. 紧凑模块化设计，单槽位安装，尺寸约 10cm×10cm×2cm，重量约 200g

12. 主要应用于紧急关断系统（ESD）、火灾和气体探测系统（F&G）、燃烧器管理系统（BMS）、涡轮机控制系统等关键安全场景

综上所述，TRICONEX 3006 凭借三重冗余架构、SIL 3 安全认证、宽温适应性及灵活的通信能力，为高可靠性工业安全控制场景提供了稳定可靠的核心处理器解决方案。

TRICONEX ENOII 3006 输入输出模块   英文介绍

The TriconeX 3006 is the core main processor module in the Triconex Safety Instrumented System (SIS), responsible for executing safety logic, processing I/O data, and system management. It adopts a Triple Modular Redundancy (TMR) architecture design and is suitable for high safety critical control fields such as oil and gas, chemical, power, and pharmaceuticals.

Adopting a Triple Modular Redundancy (TMR) architecture, three independent processors run in parallel, and a hardware voting mechanism ensures that a single point of failure does not affect system operation

Built in three independent Intel 80486SX processors, equipped with 32-bit RISC architecture, 128MB memory and 2MB non-volatile memory

Certified by T Ü V, compliant with IEC 61508 international safety standard, achieving SIL 3 safety integrity level

Supports 24V DC input voltage, operating temperature range of -40 ° C to+70 ° C, storage temperature range of -40 ° C to+85 ° C

Protection level IP20, suitable for installation inside enclosed control cabinets, suitable for harsh environments such as chemical plants and substations

Support hot swappable function, which can replace faulty modules while the system is running, reducing downtime

Typical scanning cycle ≤ 100 ms, fault safety response time less than 1 microsecond, meeting the requirement of rapid response of safety interlock

Supports multiple communication protocols such as Modbus TCP/IP, Modbus RTU (RS-485), Ethernet, HART, etc

Support TriNet redundant communication bus and TSAA point-to-point communication, compatible with upper computer monitoring protocols such as DDE and OPC

Built in real-time self check and fault diagnosis function, capable of monitoring over 90% of potential fault risks

Compact modular design, single slot installation, size approximately 10cm x 10cm x 2cm, weight approximately 200g

Mainly used in critical safety scenarios such as emergency shutdown systems (ESD), fire and gas detection systems (F&G), burner management systems (BMS), turbine control systems, etc

In summary, the TRICONEX 3006 provides a stable and reliable core processor solution for high reliability industrial safety control scenarios, thanks to its triple redundancy architecture, SIL 3 safety certification, wide temperature adaptability, and flexible communication capabilities.

TRICONEX ENOII 3006 输入输出模块  产品展示   

3.其他产品

ICS TRIPLEX T8403控制系统模块
ICS TRIPLEX T8151B通讯接口模块
PP846A 3BSE042238R2 控制显示面板

4.其他英文产品

GDB021BE GDB021BE01 HIEE300766R0001 Synchronizer module
83SR06B-E GJR2395400R1210 Input/Output Module
97590-8 BD-PCI4PORT Data Acquisition Card

本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs

型号：TRICONEX ENOII 3006 输入输出模块

质保：一年

成色：全新/二手

优势产品：ABB、GE、FOXBORO、TRICONEX、BENTLY、A-B、MOTOROLA、HONEYWELL 、SCHNEIDER 

                    WOODWARD、EMERSON、RELIANCE、DEIF、NI、XYVOM等

特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

应用行业：广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、烟草、塑胶机械、电力、水利、水处理/环保、市政工程、锅炉供暖、能源、输配电等

快递方式：国内顺丰、德邦、京东快递包邮，按照实际报价货期发货