Honeywell 51304485-150 MC-PD1X02数字输入模块  PDF资料

1.产 品 资 料 介 绍：

Honeywell 51304485-150 是霍尼韦尔（Honeywell）DCS 系统中的数字输入处理器模块（DI IOP），型号标识为 MC-PDIX02，用于 Experion PKS 及 HPM 系统，采集现场开关、继电器触点及固态传感器的离散信号。

产品特点（5条）

1. 32 路数字输入处理：模块可处理 32 路数字输入通道，与兼容的 FTA（现场终端组件）配合使用，适配 24V DC、120V AC 或 240V AC 现场回路。

2. 通道与总线隔离：采用通道间及总线隔离设计，防止现场接地环路干扰系统背板，隔离耐压达 1500 VAC RMS。

3. 高速信号采集：输入频率范围 DC 至 15 Hz，响应快速，满足流程工业离散状态监测需求。

4. 支持热插拔维护：可在 HPM 机架带电状态下更换模块，便于系统维护时减少停机时间。

5. 三防涂层保护：模块带三防漆涂层，抵御湿度、腐蚀性气体及工业污染物对内部电路的影响。

产品应用领域（10条）

1. Honeywell Experion PKS 过程自动化系统

2. Honeywell HPM（高性能过程管理器）机架

3. 石油与天然气流程控制

4. 化工与石化装置离散信号采集

5. 发电厂与公用事业 DCS 系统

6. 现场开关与继电器触点状态监测

7. 固态传感器信号接入

8. 流程工业安全联锁与状态反馈回路

9. 老旧霍尼韦尔 DCS 系统 I/O 模块替换

10. 大型工厂控制系统集成与维保

结尾

Honeywell 51304485-150（MC-PDIX02） 是 Experion PKS / HPM 架构下的 32 路数字输入处理器，以通道隔离、热插拔维护及三防涂层为核心特点，主要用于流程工业 DCS 系统的现场离散信号采集与模块替换场景。

Honeywell 51304485-150 MC-PD1X02数字输入模块   英文介绍

Honeywell 51304485-150 is a digital input processor module (DI IOP) in Honeywell DCS systems, identified as MC-PDIX02. It is used in the Expert PKS and HPM systems to collect discrete signals from on-site switches, relay contacts, and solid-state sensors.

Product features (5 items)

32 channel digital input processing: The module can process 32 channels of digital input and is compatible with FTA (Field Terminal Component) for use in 24V DC, 120V AC, or 240V AC field circuits.

Channel and bus isolation: Adopting channel and bus isolation design to prevent on-site grounding loop interference with the system backplane, the isolation withstand voltage reaches 1500 VAC RMS.

High speed signal acquisition: Input frequency range DC to 15 Hz, fast response, meets the requirements of discrete state monitoring in process industries.

Support hot swappable maintenance: Modules can be replaced while the HPM rack is powered on, reducing downtime during system maintenance.

Three proof coating protection: The module is equipped with a three proof paint coating to resist the influence of humidity, corrosive gases, and industrial pollutants on the internal circuit.

Product application areas (10 items)

Honeywell Expert PKS Process Automation System

Honeywell HPM (High Performance Process Manager) Rack

Oil and gas process control

Discrete signal acquisition for chemical and petrochemical plants

Power plant and utility DCS system

On site switch and relay contact status monitoring

Solid state sensor signal access

Process industry safety interlock and status feedback loop

Replacement of old Honeywell DCS system I/O modules

Integration and maintenance of control systems in large factories

ending

Honeywell 51304485-150 (MC-PDIX02) is a 32 channel digital input processor based on the Expert PKS/HPM architecture. Its core features include channel isolation, hot swappable maintenance, and three proof coating. It is mainly used for on-site discrete signal acquisition and module replacement scenarios in process industry DCS systems.

Honeywell 51304485-150 MC-PD1X02数字输入模块   产品图片

3.其他产品

HONEYWELL CC-PUIO31输入模块
GE 239 电机保护继电器
EMERSON 12P4711X042调节器模块

4.其他产品

WOODWARD 8200-226 governor
ALSTOM AL132 Control card
ALSTOM IR139-1 Control card

本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:https://www.jiangxidcs.com 

型号：Honeywell 51304485-150 MC-PD1X02数字输入模块

质保：一年

成色：全新/二手

优势产品：ABB、GE、FOXBORO、TRICONEX、BENTLY、A-B、MOTOROLA、HONEYWELL 、SCHNEIDER 

                    WOODWARD、EMERSON、RELIANCE、DEIF、NI、XYVOM等

特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

应用行业：广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、烟草、塑胶机械、电力、水利、水处理/环保、市政工程、锅炉供暖、能源、输配电等

快递方式：国内顺丰、德邦、京东快递包邮，按照实际报价货期发货