SPIRAX SARCO LC3000液位控制器 PDF资料
先唠两句
SPIRAX SARCO LC3000 是斯派莎克的一款锅炉液位控制器,主要负责低水位或高水位报警,带自监测功能,属于安全型设备。
产品特点
1 带循环自检,每隔几秒自动验证探头和控制器是否正常
2 双电压设计,115V 和 230V 可选,内部开关切换
3 前面板 LED 指示灯,绿灯正常,红灯报警
4 带测试按钮,可手动或远程测试
5 故障安全设计,检测到故障自动切断燃烧器并报警
产品参数
1 供电 230V 或 115V,50/60Hz,功耗约 5 到 6VA
2 探头电缆最长 50 米,需屏蔽电缆
3 最小水导电率 30 µS/cm
4 防护等级 IP40,环境温度 0 到 55°C
5 尺寸约 106 x 111 x 24mm,支持 DIN 导轨安装
应用领域
1 蒸汽锅炉低水位报警
2 热水锅炉低水位或高水位报警
3 配合 LP30 探头做低水位保护
4 配合 LP31 探头做高水位报警
5 锅炉燃烧器联锁控制
总结
SPIRAX SARCO LC3000 就是斯派莎克锅炉液位控制里的核心报警控制器,靠电导率检测水位,最大卖点是自监测和循环自检,故障时能安全切断。它必须配合 LP30 或 LP31 探头使用,不能单独工作。
Let's have a few words first
SPIRAX SARCO LC3000 is a boiler level controller from Spirax, mainly responsible for low or high water level alarms, with self-monitoring function, and belongs to safety equipment.
Product Features
1. Equipped with a loop self-test, it automatically verifies whether the probe and controller are normal every few seconds
2 dual voltage design, 115V and 230V optional, internal switch switching
3 front panel LED indicator lights, green light normal, red light alarm
4 with test button, can be manually or remotely tested
5 Fault safety design, automatically cuts off the burner and alarms when a fault is detected
Product Specifications
1. Power supply 230V or 115V, 50/60Hz, power consumption of approximately 5 to 6VA
The maximum length of the 2-probe cable is 50 meters, and the cable needs to be shielded
Minimum water conductivity of 30 µ S/cm
4 protection level IP40, ambient temperature from 0 to 55 ° C
5 dimensions approximately 106 x 111 x 24mm, supporting DIN rail installation
Application Areas
1. Steam boiler low water level alarm
2. Low or high water level alarm for hot water boiler
3. Cooperate with LP30 probe for low water level protection
4. Cooperate with LP31 probe for high water level alarm
5 Boiler Burner Interlock Control
Summary
SPIRAX SARCO LC3000 is the core alarm controller in the liquid level control of Spirax Sak boiler. It relies on conductivity to detect water level, and its biggest selling point is self-monitoring and cyclic self inspection. It can safely cut off in case of faults. It must be used in conjunction with LP30 or LP31 probes and cannot work alone.

3.其他产品
VE5010 逻辑控制器模块
KJ3222X1-BA1模拟输入模块
1C31197G01 定位器模块
4.其他产品
EMERSON PR6423/008-110+CON021 front-end
EMERSON PR6423/00R-010+CON021 Speed sensor
EPRO CON011 9200-00001 Front-end module
| AMAT 0190-33452 | AMAT 0190-36774 | AMAT 0190-13511 |
| AMAT 0190-37775 | AMAT 0190-36793 | AMAT 0190-13557 |
| AMAT 0190-52419 | AMAT 0190-37099 02 | AMAT 0190-13605 |
| AMAT 0190-17464 | AMAT 0190-37178 | AMAT 0190-13625 |
| AMAT 0190-23562 | AMAT 0190-37200 | AMAT 0190-13626 |
| AMAT 0190-16372 | AMAT 0190-37256 | AMAT 0190-13654 |
本篇文章出自瑞昌明盛自动化设备有限公司官网,转载请附上此链接:https://www.jiangxidcs.com



