MPA-06-165 伺服驱动器 PDF资料 

1.产 品 资 料 介 绍：

Parker MPA‑06‑165 是 MPA 系列的一款无刷伺服驱动器，主要用于中小功率伺服系统，特点和参数如下：

基本参数

• 类型：无刷伺服驱动器（支持闭环控制）

• 输入电源：单相 80–260 V AC，45–65 Hz

• 输出电流：连续 7 A，峰值 14 A（峰值持续约 1 秒）

• PWM 输出频率：约 18 kHz

• 尺寸/重量：约 3.6 kg

• 反馈支持：解析器 (resolver) 反馈，用于位置或速度闭环控制

功能与特性

• 可控制无刷伺服电机的速度、位置和转矩

• 内置热保护、电流限制、防短路和电源浪涌保护

• 控制接口包括模拟输入 (±10 V) 和逻辑 I/O (启用、限位、复位等)

• 可输出模拟编码器信号，用于外部计数或控制器反馈

• 响应速度快，适合启动、停止、转向和加减速场合

适用场景

• 小型或中等功率伺服系统

• 自动化设备、机械手、包装和搬运设备

• 需要速度/位置/转矩控制，且对控制接口要求较简单的系统

• 对动态响应有要求，但功率不极端的应用

使用注意事项

• 驱动器为单相输入，连续输出电流 7 A，选择电机时需匹配额定电流和峰值

• 必须配合支持解析器反馈的伺服电机

• 驱动器功能相对基础，不适合复杂多轴高精度联动系统

• 安装和调试时需确保控制电压、逻辑电平与驱动器匹配

MPA-06-165 伺服驱动器 英文介绍

Parker MPA-06-165 is a brushless servo drive in the MPA series, mainly used for small and medium power servo systems. Its features and parameters are as follows:

Basic Parameters

Type: Brushless servo drive (supporting closed-loop control)

Input power supply: single-phase 80-260 V AC, 45-65 Hz

Output current: Continuous 7 A, peak value 14 A (peak value lasts about 1 second)

PWM output frequency: approximately 18kHz

Size/Weight: Approximately 3.6 kg

Feedback support: parser feedback, used for position or velocity closed-loop control

Features and Functions

Can control the speed, position, and torque of brushless servo motors

Built in thermal protection, current limiting, short-circuit protection, and power surge protection

The control interface includes analog input (± 10   V) and logic I/O (enable, limit, reset, etc.)

Can output analog encoder signals for external counting or controller feedback

Fast response speed, suitable for starting, stopping, turning, and acceleration/deceleration situations

Applicable scenarios

Small or medium power servo system

Automation equipment, robotic arms, packaging and handling equipment

Systems that require speed/position/torque control and have relatively simple control interface requirements

Applications that require dynamic response but not extreme power

Precautions for use

The driver is a single-phase input with a continuous output current of 7A. When selecting a motor, it is necessary to match the rated current and peak value

Must cooperate with servo motors that support parser feedback

The driver function is relatively basic and not suitable for complex multi axis high-precision linkage systems

During installation and debugging, it is necessary to ensure that the control voltage, logic level, and driver are matched

MPA-06-165 伺服驱动器 产品展示   

3.其他产品

TRICONEX 3704E 数字量输入模块
3BHB030310R0001 可控硅模块
MOTOROLA MVME167-33B单板嵌入式控制器 

4.其他英文产品

XVC517AE10 3BHB004744R0010 Excitation module
1756-CNBR Interface module
TRICONEX 3625 Digital module

本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs 

型号： MPA-06-165 伺服驱动器

质保：一年

成色：全新/二手

优势产品：ABB、GE、FOXBORO、TRICONEX、BENTLY、A-B、MOTOROLA、HONEYWELL 、SCHNEIDER 

                    WOODWARD、EMERSON、RELIANCE、DEIF、NI、XYVOM等

特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。

应用行业：广泛应用于冶金、石油天然气、玻璃制造业、铝业、石油化工、煤矿、造纸印刷、纺织印染、机械、电子制造、汽车制造、烟草、塑胶机械、电力、水利、水处理/环保、市政工程、锅炉供暖、能源、输配电等

快递方式：国内顺丰、德邦、京东快递包邮，按照实际报价货期发货