DFE24B/UOH11B通信接口模块 PDF资料
1.产 品 资 料 介 绍：
SEW DFE24B/UOH11B 通信接口模块简介
DFE24B/UOH11B 是 SEW-EURODRIVE 驱动系统使用的通信扩展模块，属于 DFE24B 系列接口卡的特定配置型号。该类模块主要用于为变频器、伺服驱动器（如 MOVITRAC、MOVIDRIVE 系列）提供工业现场总线或以太网通信能力，使驱动系统能够集成到上位 PLC 或自动化总线网络中。
“UOH11B” 多为模块的子代码，表示其通信协议或硬件特性配置。
主要特点
增强总线通信能力
为 SEW 驱动器提供稳定的工业网络接口，与主控制系统快速交换数据。模块式结构
即插即用，可直接安装在兼容的 SEW 驱动器插槽，无需额外布线复杂改造。实时性强
适用于高速数据交互、精准运动控制及状态监控。丰富的诊断功能
可提供通信状态、错误代码、网络质量等反馈信息，便于维护。适配多种 SEW 驱动平台
可用于多款变频器/伺服驱动器，提升系统扩展性。
典型技术参数（DFE24B 系列参考）
若你希望，我可根据实际驱动器型号进一步确认该版本的具体通讯协议。
工作电源：由驱动器本体供电
通讯协议：DFE24B 系列通常对应工业以太网、PROFINET、EtherNet/IP 或其他协议版本
数据速率：100 Mbps（以太网）或对应协议速率
状态指示：LED 网络状态灯、通信指示灯
安装方式：驱动器内部扩展槽插卡式安装
环境条件：满足 SEW 驱动系统工业级工作温度区间
Introduction to SEW DFE 24B/UOH11B Communication Interface Module
DFE24B/UOH11B is a communication expansion module used in the SEW-EURODRIVE drive system, and is a specific configuration model of the DFE24B series interface card. This type of module is mainly used to provide industrial fieldbus or Ethernet communication capabilities for frequency converters and servo drives (such as MOVITRAC, MOVIDRIVE series), enabling the drive system to be integrated into the upper PLC or automation bus network.
UOH11B "is often a subcode of a module, representing its communication protocol or hardware feature configuration.
Main Features
Enhance bus communication capability
Provide a stable industrial network interface for SEW drivers to quickly exchange data with the main control system.
Modular structure
Plug and play, can be directly installed in compatible SEW drive slots without the need for additional wiring or complex modifications.
Strong real-time performance
Suitable for high-speed data exchange, precise motion control, and status monitoring.
Rich diagnostic functions
It can provide feedback information such as communication status, error codes, network quality, etc. for easy maintenance.
Compatible with multiple SEW driver platforms
Can be used for multiple frequency converters/servo drives to enhance system scalability.
Typical Technical Parameters (Reference for DFE24B Series)
If you wish, I can further confirm the specific communication protocol of this version based on the actual drive model.
Working power supply: powered by the drive body
Communication Protocol: The DFE 24B series typically corresponds to Industrial Ethernet, PROFINET, EtherNet/IP, or other protocol versions
Data rate: 100 Mbps (Ethernet) or corresponding protocol rate
Status indicator: LED network status light, communication indicator light
Installation method: Insert card installation into the internal expansion slot of the drive
Environmental conditions: Meet the industrial working temperature range of SEW drive system
3.其他产品
EMERSON P152.R4 温度传感器
EMERSON P144.R4输入输出模块
Bently 3500/54 133396-01 位移监测器
4.其他英文产品
IS215UCVEM09A Gas turbine module
HIMA聽ELOP聽II software CD
1C31179G02 Transmitter input module
| 6ES5470-7LC12 | CACR-PR30BC3AFY | 3HAB8101-19 DSQC545A |
| 6ES5470-7LB13 | CACR-SR05BB1BF | 6SC6101-2B-Z |
| 6ES5470-7LB12 | CONTROLLER | TSX3721101 |
| 6ES5470-7LA13 | CACR-SR03SB1AF | TSX07301012 |
| 6ES5470-7LA12 | CACR-IR101010FB | 140NOE77101 |
| 6ES5470-4UA13 | CACR-SR20BB1BF-H | 140MSB10100 |
| 6ES5466-8MC11 | CACR-SR06TZ6SM-E | 140CRA93101 |
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs
