17F5A1H-364A伺服控制器 PDF资料
1.产 品 资 料 介 绍：
KEB 17F5A1H-364A 伺服控制器简介
KEB 17F5A1H-364A 属于 KEB 传统 Multi-Drive / Combivert F5 系列的伺服驱动单元，主要用于高性能电机控制应用。该系列以稳定性强、调节性能好、适应多种编码器和通信方式而著称，适用于复杂机械的动力控制系统。
核心特性
高性能矢量控制
支持无传感器和带编码器的矢量控制，可实现稳定、精准的速度与转矩输出。兼容多种电机类型
适用于异步电机、同步伺服电机，适合改造与新设备的不同方案。功能模块化
F5 系列提供丰富功能卡（通讯、制动、电源等），型号尾码如“364A”一般对应固定的配置组合。自学习与自动调谐
内置电机自学习功能，提高伺服性能与响应速度。适用复杂工况
稳定性高，适用于包装机械、数控加工设备、输送线、绕线机等要求较高的应用场景。
典型技术参数（基于 F5 系列通用特性参考）
该型号属于专用配置版，若你有铭牌，我可帮你匹配更精确电流等级。
工作电压：常见为三相 380–480 V（F5 标准电压等级）
输出功率段：通常在 1.5 kW – 7.5 kW 范围内（具体视“17F5A1H”内部配置）
控制方式：矢量控制 / 闭环伺服控制
反馈支持：
增量编码器
旋变（选配）
一些型号支持总线编码器（根据模块配置）
通讯接口：可搭配现场总线模块（如 CAN、Profibus、EtherCAT，依实际配置为准）
保护功能：过载、过流、过温、欠压、编码器故障检测等
环境温度：一般 -10…+45 °C（满载）
Introduction to KEB 17F5A1H-364A Servo Controller
KEB 17F5A1H-364A belongs to KEB's traditional Multi Drive/Combivert F5 series servo drive unit, mainly used for high-performance motor control applications. This series is known for its strong stability, good regulation performance, adaptability to multiple encoders and communication methods, and is suitable for power control systems of complex machinery.
Core Features
High performance vector control
Support vector control without sensors and with encoders, which can achieve stable and accurate speed and torque output.
Compatible with multiple types of motors
Suitable for asynchronous motors, synchronous servo motors, and different solutions for retrofitting and new equipment.
Functional modularization
The F5 series provides a variety of functional cards (communication, braking, power, etc.), with model suffixes such as "364A" generally corresponding to fixed configuration combinations.
Self learning and automatic tuning
Built in motor self-learning function to improve servo performance and response speed.
Suitable for complex working conditions
High stability, suitable for applications with high requirements such as packaging machinery, CNC machining equipment, conveyor lines, winding machines, etc.
Typical Technical Parameters (Based on F5 Series General Characteristics Reference)
This model belongs to the dedicated configuration version. If you have a nameplate, I can help you match more accurate current levels.
Working voltage: commonly three-phase 380-480 V (F5 standard voltage level)
Output power range: typically within the range of 1.5 kW to 7.5 kW (depending on the internal configuration of "17F5A1H")
Control mode: Vector control/closed-loop servo control
Feedback support:
Incremental encoder
Rotary Transformer (optional)
Some models support bus encoders (depending on module configuration)
Communication interface: Can be paired with fieldbus modules (such as CAN, Profibus, EtherCAT, depending on actual configuration)
Protection functions: overload, overcurrent, overtemperature, undervoltage, encoder fault detection, etc
Environmental temperature: generally -10...+45 ° C (full load)
3.其他产品
FOXBORO SY-60702001RA 单板计算机
LXN1604-6 3BHL000986P7000导轨式电源模块
UFC762AE101 3BHE006412R0101伺服驱动模块
4.其他英文产品
WESDAC D20ME Gas turbine channel CARDS
1C31203G01 Analog channel CARDS
B&R 5AP1130.156C-000 Touch screen
| BA3628-1331-56B | HA110D6 | DSTC404 ABB |
| BA3624-7045-56C | SS9MS-11A1A0A | 5736 045-N DSMD113 ABB |
| BA3624-7024-9-56BC | HA42A6 | IMASO11 |
| BA3624-7005-9-56BC | SL2C-38L | EPC-161316AE |
| BA3624-5558-56B | SL4-120-RBKK-CR | 48964402-D, |
| BA3618-7009-9-56BC | SB4-J254 | ICS TRIPLEX TC-801-02- .4M5 |
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs
