MD115B-N-011-N 5M-180GB2伺服电机 PDF资料
1.产 品 资 料 介 绍：
MD115B-N-011-N-5M-180GB2 伺服电机简介
该型号属于 Indramat（现为 Bosch Rexroth）经典的 MDD/MD 系列高速交流伺服电机，特点是转速高、响应快、扭矩稳定，适合应用在高速加工设备、包装机械、数控机床以及高动态运动平台。
产品结构特性
稀土永磁同步结构
提供高转矩密度与优异的动态响应。低转动惯量设计（Low Inertia）
适合快速启动、急停、反向和频繁的加减速动作。高分辨率反馈系统
通常配备数字式编码器，用于与 Indramat 的驱动器实现精准闭环控制。强度高的机械外壳与轴承结构
适用于长时间连续运行、快速负载变化和工业恶劣环境。法兰安装方式
便于整合到机械结构中，可实现标准化接口安装。
型号代码要点解析（简要版）
MD115B：表示机架尺寸为 115，B 级长度，属于高速响应等级。
N-011：通常指电气/绕组配置与额定转速范围。
N-5M：表示反馈系统与构建细节，适配特定驱动器。
180GB2：多用于定义轴型式、冷却方式、防护等级和输出法兰信息等。
（不同尾缀组合代表不同的绕组、转速、编码器与机械接口配置。）
典型性能范围（基于 MD/MDD 115 系列常见参数）
具体数字随子型号而变化，下列为常见范围，适用于此类 115 尺寸高速伺服电机。
额定输出扭矩：约 10–20 N·m
峰值扭矩：可达额定的 3 倍左右
额定转速：约 1500–3000 rpm
最高转速：通常可达 4500–6000 rpm
冷却方式：自然冷却或表面散热
绝缘等级：F 级
防护等级：一般为 IP65（轴封区域可能为 IP54）
MD115B-N-011-N 5M-180GB2伺服电机 英文介绍
Introduction to MD115B-N-011-N-5M-180GB2 servo motor
This model belongs to the classic MDD/MD series high-speed AC servo motor of Indramat (now Bosch Rexroth), characterized by high speed, fast response, and stable torque. It is suitable for application in high-speed machining equipment, packaging machinery, CNC machine tools, and high dynamic motion platforms.
Product structural characteristics
Rare earth permanent magnet synchronous structure
Provide high torque density and excellent dynamic response.
Low Inertia Design
Suitable for quick start, emergency stop, reverse, and frequent acceleration and deceleration actions.
High resolution feedback system
Usually equipped with a digital encoder, it is used to achieve precise closed-loop control with Indramat's drivers.
High strength mechanical casing and bearing structure
Suitable for long-term continuous operation, rapid load changes, and harsh industrial environments.
Flange installation method
Easy to integrate into mechanical structures and achieve standardized interface installation.
Key points analysis of model code (brief version)
MD115B: indicates a rack size of 115, B-level length, and belongs to the high-speed response level.
N-011: Usually refers to electrical/winding configuration and rated speed range.
N-5M: Refers to the feedback system and construction details, adapted to specific drivers.
180GB2: It is commonly used to define shaft types, cooling methods, protection levels, and output flange information.
(Different suffix combinations represent different winding, speed, encoder, and mechanical interface configurations.)
Typical performance range (based on common parameters of MD/MDD 115 series)
The specific numbers vary with the sub model, and the following are common ranges applicable to this type of 115 size high-speed servo motor.
Rated output torque: approximately 10-20 N · m
Peak torque: up to about 3 times the rated torque
Rated speed: approximately 1500-3000 rpm
Maximum speed: usually up to 4500-6000 rpm
Cooling method: natural cooling or surface heat dissipation
Insulation level: F level
Protection level: generally IP65 (shaft seal area may be IP54)
MD115B-N-011-N 5M-180GB2伺服电机 产品展示
3.其他产品
PFTL301E 3BSE019050R1000 1.0kN 压力传感器
A30-30-10RT接触器
Bently 3500/15E 164949-01电源模块
4.其他英文产品
TEAM BL0308 Automatic card
ACU-01B 3HNA024871-001/03 controller
BENTLY 125840-01 Monitor card
| IC3600SLEH1A | CACR-UIR101010FD | ICS TRIPLEX 831-6360 |
| IC3600SLEH1 | AMAT 0660-01813 | ICS TRIPLEX 831-4699 |
| IC3600SIXM1A1A | CACR-IR05SEB | ICS TRIPLEX 56AMXN |
| IC3600SIXM1 | CACR-SR12TG5BMB | ICS TRIPLEX 18-32VDc |
| IC3600SIXL1A1A | CACR-SR15BB1AF | ICS TRIPLEX 0818-267 |
| IC3600SIXL1 | CACR-SR44BZ1SF | ICS TRIPLEX T8461 |
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs
