AEG MODICON AS-BDEP-215离散输入模块 PDF资料
1.产 品 资 料 介 绍:
AEG Modicon AS-BDEP-215 离散输入模块简介
AEG Modicon AS-BDEP-215 是一款用于采集现场开关量信号的 离散输入模块,可将设备的状态信息(开/关、动作/未动作、故障/正常等)转换成 PLC 系统能够处理的数据。它常用于工业现场的状态监测、联锁逻辑和安全回路中。
核心功能特点
1. 多路数字输入能力
模块通常提供多通道输入,支持接入按钮、限位开关、继电器触点、保护信号等多种干接点或有源信号。
2. 良好的抗干扰能力
采用工业级隔离与滤波设计,可在噪声较强的环境中稳定读取信号,降低误触发的风险。
3. 快速响应的输入电路
适用于需要即时判断的控制流程,如设备联锁、动作确认、报警检测等。
4. 与 Modicon 系统完全兼容
安装在 800 系列机架中,通过背板直接与 CPU 通信,无需额外转接或配置,维护和更换非常方便。
典型应用场景
采集设备运行/停止、阀门开位、机构到位等状态
工程联锁逻辑的输入端,如安全保护回路
生产线报警、故障输入信号收集
工厂机组、输送系统、包装线等的基本开关量判断
AEG MODICON AS-BDEP-215离散输入模块 英文介绍
Introduction to AEG Modicon AS-BDEP-215 Discrete Input Module
AEG Modicon AS-BDEP-215 is a discrete input module used for collecting on-site switch signals, which can convert device status information (on/off, active/inactive, fault/normal, etc.) into data that can be processed by PLC systems. It is commonly used for status monitoring, interlocking logic, and safety circuits in industrial sites.
Core functional features
1. Multi channel digital input capability
Modules typically provide multi-channel inputs and support various dry contacts or active signals such as access buttons, limit switches, relay contacts, and protection signals.
2. Good anti-interference ability
Adopting industrial grade isolation and filtering design, it can stably read signals in environments with strong noise, reducing the risk of false triggering.
3. Fast response input circuit
Suitable for control processes that require real-time judgment, such as equipment interlocking, action confirmation, alarm detection, etc.
4. Fully compatible with Modicon system
Installed in the 800 series rack, it communicates directly with the CPU through the backplane without the need for additional adapters or configurations, making maintenance and replacement very convenient.
Typical application scenarios
Collect the status of equipment operation/stop, valve opening, mechanism in place, etc
The input terminal of engineering interlocking logic, such as safety protection circuit
Collection of production line alarm and fault input signals
Basic switch quantity judgment for factory units, conveying systems, packaging lines, etc
AEG MODICON AS-BDEP-215离散输入模块 产品展示

3.其他产品
Emerson SKB3400150 交流电驱动器
ABB REF610C11HCNR01 继电器
ABB RDCU-12C 3AUA0000036521控制板
4.其他英文产品
HONEYWELL CC-PAIM01 Actuator module
HONEYWELL CC-PAIX02 Actuator module
HONEYWELL CC-PAON01 Switch module
| PC834-XYZ-T | AMAT 0100-00070 | 57390001-7 D5001 SB5032 ABB |
| PC834-XYZ-N | AMAT 0100-00986 | PMKHRMBRC3000A |
| PC834-XYZ-A | AMAT 0100-18040 | NKTK01-10 |
| PC834-106-N | AMAT 0100-00054 | 7LD21 |
| PC834-105-N | AMAT 0100-90259 | HESG447271R0002 70BK03B-ES |
| PC834-101-N | AMAT 0100-00017 | PHARPS32010000 |
| PC834-001-T | AMAT 0100-90468 | HESG447224R0002 70AB01C-ES |
本篇文章出自瑞昌明盛自动化设备有限公司官网,转载请附上此链接:http://www.jiangxidcs



