AMAT Applied Materials  DP-200-5F控制器模块 PDF资料 

1.产 品 资 料 介 绍：

已知规格与特性

• 模型：DP-200-5F

• 制造商：Applied Materials (AMAT)

• 输入电源：三相交流 200 V，50/60 Hz

• 输出能力：200 V 直流，最大电流 5 A

• 控制模式支持：恒压 (CV)、恒流 (CC)、恒功率 (CP)

• 控制方式：可本地控制或远程控制

这些参数经多个销售 / 零件目录资料确认，是该模块的主要电气规格。

可能 / 常见设计特性与功能（基于模块用途推断）

1. 多模式控制
   能根据负载需求在恒压、恒流与恒功率三种控制模式中切换，以适应不同场合（如驱动电源、线圈、加热器等）。

2. 本地与远程切换
   模块具备本地操作界面或开关，以及远程信号接口，便于集成在设备控制系统中，由上层控制器下发命令。

3. 保护机制
   为保障设备与模块安全，通常具备：

• 过流保护

• 过压 / 欠压保护

• 短路故障保护

• 过温保护

• 故障报警 / 状态反馈

4. 稳定性与品质
   在直流输出时，应具备良好的电压 / 电流稳定性、低纹波、抗干扰能力，以满足半导体设备或精密设备对电源质量的高要求。

5. 散热 / 结构设计
   内部可能包含散热片、风道或强制风冷结构，以排除功率损失产生的热量。模块通常设计为可插拔 / 插槽式以便于维护与替换。

6. 可靠性与环境适应性
   在洁净室或半导体制造环境中使用，对温度、震动、电磁兼容性 (EMC) 要求较高。设计中可能考虑防尘、抗电磁干扰、耐用寿命等。

7. 系统兼容接口
   在设备系统内需与控制总线、信号层、接地 / 地线系统、电气接口兼容，确保控制、反馈、保护等功能协同运作。

AMAT Applied Materials  DP-200-5F控制器模块 英文介绍

Known specifications and characteristics

Model: DP-200-5F

Manufacturer: Applied Materials (AMAT)

Input power supply: three-phase AC 200 V, 50/60 Hz

Output capacity: 200 V DC, maximum current 5 A

Control mode support: Constant Voltage (CV), Constant Current (CC), Constant Power (CP)

Control mode: can be controlled locally or remotely

These parameters have been confirmed by multiple sales/parts catalogs and are the main electrical specifications for this module.

Possible/common design features and functions (inferred based on module usage)

Multi mode control

Can switch between constant voltage, constant current, and constant power control modes according to load requirements to adapt to different situations (such as driving power supply, coil, heater, etc.).

Local and remote switching

The module has a local operating interface or switch, as well as a remote signal interface, making it easy to integrate into the device control system and issue commands from the upper level controller.

protection mechanism

To ensure the safety of equipment and modules, it is usually necessary to have:

overcurrent protection

Overvoltage/undervoltage protection

Short circuit fault protection

over-temperature protection

Fault alarm/status feedback

Stability and Quality

When outputting DC, it should have good voltage/current stability, low ripple, and anti-interference ability to meet the high requirements of semiconductor or precision equipment for power quality.

Heat dissipation/structural design

Internally, there may be heat sinks, air ducts, or forced air cooling structures to eliminate the heat generated by power loss. Modules are typically designed as pluggable/slot based for easy maintenance and replacement.

Reliability and environmental adaptability

When used in clean rooms or semiconductor manufacturing environments, high requirements are placed on temperature, vibration, and electromagnetic compatibility (EMC). Dust prevention, electromagnetic interference resistance, and durability may be considered in the design.

System compatible interface

In the equipment system, it is necessary to be compatible with the control bus, signal layer, grounding/grounding system, and electrical interface to ensure the coordinated operation of control, feedback, protection, and other functions.

AMAT Applied Materials  DP-200-5F控制器模块 产品展示      

3.其他产品

IS200WETAH1AEC 接口模块
FOXBORO H90 H90C9AA0117S计算机工作站
EMERSON P188.R2连接器板

4.其他英文产品

ACMETRANSFORMER T-2-53007-S transformer
IC695CPE310-ABAD gas turbine electric card
MVME7100 Digital card

本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs