SANYO DENKI 65AA008VXR07伺服放大器 PDF资料
1.产 品 资 料 介 绍：
产品概述
65AA008VXR07 是 SANYO DENKI 的一款 伺服放大器（伺服驱动器），用于控制交流伺服电机，实现位置、速度和扭矩的闭环控制。它是工业自动化系统中电机与控制信号之间的核心功率与控制模块。
主要功能特点
功率放大与电机驱动
将来自控制器的指令信号转换为电机所需的电流和电压，实现精确驱动。闭环控制支持
支持位置控制、速度控制和扭矩控制模式，适应多种工业自动化需求。反馈接口
可接收编码器、旋变或其他传感器的反馈信号，实现精密运动控制。保护功能
内建过流、过压、欠压、过温、短路等多重保护机制，保障电机和系统安全。通信与接口
提供数字/模拟输入输出接口，可与 PLC、运动控制器或上位机系统通信。散热设计
采用散热通道或散热器设计，确保长期稳定运行。参数设置与调试
支持现场调节电机和负载参数，以优化性能和响应特性。
典型应用领域
数控机床的主轴或进给轴控制
自动化生产线、输送线、分拣设备
工业机器人关节驱动
包装与印刷机械的同步与定位控制
精密测量与检测设备
使用注意事项
电源匹配：确保输入电压和频率符合设备规格。
电机匹配：驱动器额定电流和功率应与电机匹配。
接线规范：电源、控制线和反馈线应按规定布线和屏蔽。
散热：保持通风良好，必要时使用强制风冷。
保护与监控：结合外部断路器和内部保护机制，定期监控运行状态。
参数调校：根据实际负载和运动要求进行参数微调，保证最佳性能。
SANYO DENKI 65AA008VXR07伺服放大器 英文介绍
Product Overview
65AA008VXR07 is a servo amplifier (servo driver) from SANYO DENKI, used to control AC servo motors and achieve closed-loop control of position, speed, and torque. It is the core power and control module between motors and control signals in industrial automation systems.
Main functional features
Power amplification and motor drive
Convert the command signals from the controller into the required current and voltage for the motor to achieve precise driving.
Closed loop control support
Supports position control, speed control, and torque control modes to meet various industrial automation needs.
Feedback interface
Can receive feedback signals from encoders, transformers, or other sensors to achieve precise motion control.
protection function
Built in multiple protection mechanisms such as overcurrent, overvoltage, undervoltage, overtemperature, and short circuit ensure the safety of motors and systems.
Communication and Interface
Provide digital/analog input/output interfaces that can communicate with PLCs, motion controllers, or upper computer systems.
thermal design
Adopting a heat dissipation channel or radiator design to ensure long-term stable operation.
Parameter Setting and Debugging
Support on-site adjustment of motor and load parameters to optimize performance and response characteristics.
Typical application areas
Spindle or feed axis control of CNC machine tools
Automated production lines, conveyor lines, sorting equipment
Industrial robot joint drive
Synchronization and positioning control of packaging and printing machinery
Precision measurement and testing equipment
Precautions for use
Power matching: Ensure that the input voltage and frequency meet the device specifications.
Motor matching: The rated current and power of the driver should match the motor.
Wiring specifications: Power, control, and feedback wires should be wired and shielded according to regulations.
Heat dissipation: Maintain good ventilation and use forced air cooling if necessary.
Protection and monitoring: Combining external circuit breakers and internal protection mechanisms, regularly monitor the operating status.
Parameter tuning: Fine tune parameters according to actual load and motion requirements to ensure optimal performance.
SANYO DENKI 65AA008VXR07伺服放大器 产品展示
3.其他产品
ABB PM858 3BSE093350R1 可编程控制器
ABB LDSTA-01 通讯模块
ABB LDMUI-01 电源模块
4.其他英文产品
A-B 6181P-17A2MWX1DC display computer terminal
Matrox 0P413G1GSFL/04 Controller Module
Lam 810-069751-114 edge detection connection board
| SR469-P5-LO-A20-E | SC452-044-05 | SC903-020-01 |
| SR469-P5-LO-A20 | AMAT 0100-09050 | SC903TN-001-01 |
| SR469-P5-HI-A20-T | AMAT 0100-00689 | PFEA 113, IP 65 |
| SR469-P5-HI-A20-E-H | AMAT 0100-A0491 | PFCL 301E-0.2 |
| SR469-P5-HI-A20-E | AMAT 0100-13025 | DSRC 113 ABB |
| SR469-P5-HI-A20 | AMAT 0100-76109 | PFCL 301E-1.0KN |
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs
