ABB YPO105E YT204001-FR工控控制卡件优势供应

1.产      品      详      情      资      料：   

使用OLED菜单功能检查IP地址。有关默认IP地址和其他详细信息，请参阅建立初始以太网通信，第3.4.1.节。需要CAT 5电缆（或更高级）才能在100/1000BaseT局域网中正常工作。引脚排列为：在绿色上已建立相应的链接。在相应端口检测到闪烁的绿色流量。关闭在相应端口未建立连接。链路速度（较低）打开绿色相应数据速度为1 Gbps或100 Mbps。非对应网络数据速度为10Mbps现场代理CPE400下侧的嵌入式现场代理（EFA）端口（图3）是一个专用于现场代理功能的以太网端口。显示了一个典型的现场代理应用程序，其中CPE400嵌入式现场代理的作用是在本地收集数据，然后通过EFA端口将选定的数据安全传输到Predix Cloud。PACSystems RX3i保持对CPE400上剩余以太网端口及其串行端口的控制

Use the OLED menu function to check the IP Address. For default IP Address and other details, refer to Establishing Initial Ethernet Communications, Section 3.4.1. CAT 5 cables (or superior) are required for proper operation with 100/1000BaseT LANs. The pin arrangements are:On Green The corresponding link has been established. Blinking Green Traffic is detected at the corresponding port. Off No connection established at corresponding port. Link Speed (lower) On Green Corresponding data speed is 1 Gbps or 100 Mbps. Off Corresponding network data speed is 10 Mbps Field Agent The Embedded Field Agent (EFA) port on the underside of CPE400 (Figure 3) is an Ethernet port dedicated to the Field Agent functionality.shows a typical Field Agent application, in which the role of the CPE400 Embedded Field Agent (EFA) is to gather data locally, then securely transfer selected data to the Predix Cloud via the EFA port. The PACSystems RX3i maintains control over the remaining Ethernet ports on the CPE400, as well as its serial port

2.今      日      产      品      展      示      

3.   主      营      品      牌    

本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com