GIDINGS&LEWIS  502-03202-00直流输入板 PDF资料 

1.产 品 资 料 介 绍：

GIDDINGS & LEWIS 502-03202-00 直流输入板

产品应用领域

1. 数控机床控制系统

• 接收限位开关、行程开关等直流输入信号，确保机床安全运行。

2. 自动化生产线

• 采集传感器和执行器的输入信号，为工序自动化控制提供数据支持。

3. PLC 系统扩展模块

• 作为可编程逻辑控制器的输入接口，处理各种 DC 开关量信号。

4. 设备启停控制

• 接收来自操作面板的启动、停止、复位等指令信号。

5. 安全联锁与急停回路

• 监测紧急停止按钮、门禁开关等，确保设备出现异常时立即停机。

6. 电机与驱动控制

• 将电机运行状态、故障信号等直流信号传入控制系统，用于逻辑判断。

7. 工业监控与报警系统

• 接收现场报警触点输入，例如温度过高、压力异常等状态。

8. 过程控制行业

• 在化工、冶金、造纸等连续工艺生产中，采集工艺参数触发信号，实现联锁。

9. 能源与电力自动化

• 应用于电站、变电站设备监控，接收断路器、继电保护装置的输入信号。

10. 装配和包装设备

• 采集传感器信号，用于检测产品位置、计数、状态确认。

11. 机器人及运动控制系统

• 接收限位器和位置开关信号，用于安全区监控和运动范围限制。

12. 测试与实验装置

• 在实验系统中作为输入接口，采集各种外部直流信号，用于数据分析与控制逻辑测试。

英文资料：

GIDINGS&LEWIS 502-0302-00 DC Input Board

Product application areas

Numerical Control Machine Tool Control System

Receive DC input signals such as limit switches and travel switches to ensure the safe operation of the machine tool.

Automatic production line

Collect input signals from sensors and actuators to provide data support for process automation control.

PLC system expansion module

As an input interface for programmable logic controllers, it processes various DC switch signals.

Equipment start stop control

Receive command signals such as start, stop, reset, etc. from the operation panel.

Safety interlock and emergency stop circuit

Monitor emergency stop buttons, access switches, etc. to ensure that the equipment stops immediately in case of any abnormalities.

Motor and Drive Control

Transmit DC signals such as motor operating status and fault signals into the control system for logical judgment.

Industrial monitoring and alarm system

Receive on-site alarm contact inputs, such as high temperature, abnormal pressure, and other states.

Process control industry

In continuous production processes such as chemical engineering, metallurgy, and papermaking, collecting process parameter trigger signals to achieve interlocking.

Energy and Power Automation

Applied to monitoring equipment in power stations and substations, receiving input signals from circuit breakers and relay protection devices.

Assembly and packaging equipment

Collect sensor signals for detecting product position, counting, and status confirmation.

Robots and motion control systems

Receive signals from limiters and position switches for safety zone monitoring and motion range limitation.

Testing and experimental equipment

As an input interface in the experimental system, various external DC signals are collected for data analysis and control logic testing.

2.产      品      展      示      

3.其他产品