Vibro-meter 200-570-000-014 200-570-101-013 VM600模块
1.产 品 详 情 资 料：
Vibro-meter 200-570-000-014和200-570-101-013是VM600系列振动测量仪的两种型号，它们的产品特点和使用方法如下：
产品特点：
- 测量范围广：可以测量高达1000 mm/s的振动速度和高达50 g的加速度；
- 测量精度高：采用了高分辨率的16位ADC，并具备测量频率范围广、低噪声、高稳定性的特点；
- 便携式设计：小巧轻便，易于携带和使用；
- 直观易懂的操作界面：使用方便，可以轻松进行数据采集、分析和存储；
- 可靠性强：采用了先进的数字信号处理技术，具备高度的抗干扰和抗干扰能力。
使用方法：
- 准备工作：将VM600振动测量仪放置在待测设备表面，开机并等待其自检完成；
- 进行测量：选择需要测量的参数（如振动速度、加速度等），并设置采样时间和采样频率，然后按下测量键，开始进行振动测量；
- 数据分析：可以通过内置的数据分析软件或将数据导出到计算机进行数据分析和处理，进一步分析待测设备的振动状态；
- 数据存储：将测量数据存储在内置的存储器或外部SD卡中，以备后续分析和研究之用；
- 关机：测量结束后，按下关机键即可关闭振动测量仪。
需要注意的是，使用VM600振动测量仪时，应按照相关操作手册和安全要求进行操作，确保测量结果的准确性和安全性。
Vibro-meter 200-570-000-014 and 200-570-101-013 are two models of VM600 series vibration measuring instruments. Their product features and usage methods are as follows:
Product features:
Wide measurement range: it can measure vibration velocities up to 1000 mm/s and accelerations up to 50 g;
High measurement accuracy: A high-resolution 16 bit ADC is used, and features wide measurement frequency range, low noise, and high stability;
Portable design: small and lightweight, easy to carry and use;
Intuitive and easy to understand operation interface: easy to use, allowing easy data collection, analysis, and storage;
Strong reliability: Advanced digital signal processing technology is adopted, with high anti-interference and anti-interference capabilities.
usage method:
Preparation: Place the VM600 vibration measuring instrument on the surface of the equipment to be tested, start it and wait for its self inspection to complete;
Conduct measurement: select the parameters to be measured (such as vibration speed, acceleration, etc.), set the sampling time and frequency, and then press the measurement key to start vibration measurement;
Data analysis: The vibration status of the equipment to be tested can be further analyzed through built-in data analysis software or by exporting the data to a computer for data analysis and processing;
Data storage: Store measurement data in a built-in memory or external SD card for subsequent analysis and research;
Shutdown: After the measurement is completed, press the shutdown button to turn off the vibration measuring instrument.
It should be noted that when using the VM600 vibration measuring instrument, it should be operated in accordance with the relevant operating manual and safety requirements to ensure the accuracy and safety of the measurement results.
2.今 日 产 品 展 示
3. 主 营 品 牌
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
