ABB CI853K01 3BSE018103R1通信模块
1.产 品 详 情 资 料:
ABB CI853K01 3BSE018103R1是一种可编程控制器,可以用于控制器之间数据传输。以下是该设备的配置说明、使用方法和优点。配置说明:可以选择在COM3端口或CI853端口上使用,电缆长度可以通过光纤转换器大大扩展。支持RS-232C用于与COMLI串行通信的标准通信接口。
可以使用RTU模式或Modbus RTU协议进行配置。
ABB CI853K01 3BSE018103R1可以使用自定义串行通信进行配置。
支持PROFIBUS DP协议,可以通过CI854A通信接口连接到AC 800M,支持主站/从站的线路冗余和主站冗余。ABB CI853K01 3BSE018103R1使用方法:
ABB CI853K01 3BSE018103R1可以作为主站或从站使用,用于控制器之间的数据传输。
可以与AC 800M控制器和S7-1200可编程控制器配合使用。
支持热插拔,可以在不中断系统运行的情况下进行更换。
ABB CI853K01 3BSE018103R1优点:
支持多种协议和通信接口,具有较高的灵活性和兼容性。
支持线路冗余和主站冗余,提高了系统的可靠性。
支持热插拔,可以在不中断系统运行的情况下进行更换,提高了系统的可维护性
ABB CI853K01 3BSE018103R1 is a programmable controller that can be used for data transmission between controllers. The following are configuration instructions, usage methods, and advantages of the device.
Configuration Description:
You can choose to use it on either the COM3 port or the CI853 port, and the cable length can be greatly expanded through fiber optic converters.
Supports RS-232C as a standard communication interface for serial communication with COMLI.
It can be configured using RTU mode or Modbus RTU protocol.
You can configure using custom serial communication.
Supports the PROFIBUS DP protocol, and can be connected to the AC 800M through the CI854A communication interface. It supports line redundancy and master station redundancy for master/slave stations.
usage method:
It can be used as a master or slave station for data transmission between controllers.
It can be used in conjunction with AC 800M controllers and S7-1200 programmable controllers.
Supports hot swapping and can be replaced without disrupting system operation.
advantage:
Supports multiple protocols and communication interfaces, with high flexibility and compatibility.
Support line redundancy and master station redundancy, improving system reliability.
Supports hot swapping, enabling replacement without disrupting system operation, improving system maintainability.
2.产 品 展 示
3. 主 营 产 品
本篇文章出自瑞昌明盛自动化设备有限公司官网,转载请附上此链接:http://www.jiangxidcs.com