ABB DT370a GJR2237600R1处理器模块
1.产 品 详 情 资 料：
ABB DT370a GJR2237600R1是一款数字化温度传感器，具有以下特点和功能：
高精度：该传感器能够提供高达0.1℃的温度精度，可用于精密温度控制应用。
数字化输出：传感器通过数字化输出温度值，可直接与数字控制系统集成，提高自动化程度。
大范围温度测量：该传感器可测量-50℃至150℃的温度范围，适用于多种应用场合。
快速响应：传感器能够快速响应温度变化，可实时反馈温度值。
高稳定性：传感器具有良好的稳定性，可长期稳定工作，不易失准。
使用方法：
将传感器安装到需要测量温度的位置，并连接相应的数字控制系统。
配置数字控制系统，以接收传感器输出的温度值。
启动数字控制系统，传感器开始工作并实时测量温度。
参数详情：
温度测量范围：-50℃至150℃
温度精度：±0.1℃
输出类型：数字化输出
响应时间：＜1秒
稳定性：±0.1℃/年
工作电压：12-30V DC
电流消耗：＜10mA
保护等级：IP65
尺寸：直径30mm，长度85mm
注意事项：
传感器应安装在干燥、无震动、无腐蚀性气体的环境中。
安装时应注意传感器与物体的接触面积，确保接触面积充分，以保证传感器测量准确。
需要定期校准传感器以确保测量准确性
ABB DT370a GJR2237600R1 is a digital temperature sensor with the following features and functions:
High accuracy: the sensor can provide temperature accuracy up to 0.1 ℃, and can be used for precision temperature control applications.
Digital output: The sensor can be directly integrated with the digital control system to improve the degree of automation through digital output of temperature value.
Large-range temperature measurement: the sensor can measure the temperature range from - 50 ℃ to 150 ℃, and is suitable for a variety of applications.
Fast response: the sensor can respond to temperature changes quickly and can feedback temperature values in real time.
High stability: the sensor has good stability, can work stably for a long time, and is not easy to lose alignment.
usage method:
Install the sensor at the position where the temperature needs to be measured, and connect the corresponding digital control system.
Configure the digital control system to receive the temperature value output by the sensor.
Start the digital control system, the sensor starts to work and measure the temperature in real time.
Parameter details:
Temperature measurement range: - 50 ℃ to 150 ℃
Temperature accuracy: ± 0.1 ℃
Output type: digital output
Response time: ＜ 1s
Stability: ± 0.1 ℃/year
Working voltage: 12-30V DC
Current consumption: ＜ 10mA
Protection grade: IP65
Size: diameter 30mm, length 85mm
matters needing attention:
The sensor shall be installed in a dry, vibration-free and corrosion-free environment.
During installation, pay attention to the contact area between the sensor and the object to ensure that the contact area is sufficient to ensure the accurate measurement of the sensor.
The sensor needs to be calibrated regularly to ensure measurement accuracy
2.产 品 展 示
3.公 司 优 势 主 营 产 品
4.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
