HONEYWELL CC-TAOX01输入输出模块
1.产 品 介 绍
品牌：HONEYWELL
型号说明：HONEYWELL CC-TAOX01输入输出模块
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
HONEYWELL CC-TAOX01是一款工业用氧气传感器，主要用于监测氧气浓度和控制流程。以下是该产品的特点介绍、使用方法和参数规格：
特点介绍：
- HONEYWELL CC-TAOX01采用电化学原理，能够准确、快速地监测氧气浓度。
- 该传感器响应速度快，可在5秒内达到95%的响应。
- CC-TAOX01具有自动校准功能，可以在使用过程中自动校准，保持传感器的准确性。
- 该传感器具有较高的精度和稳定性，可以在恶劣环境下长时间稳定运行。
使用方法：
- CC-TAOX01需要与氧气检测仪或控制器连接，可以通过4-20mA信号输出测量结果。
- 安装传感器时，需要将其插入到安装支架中，并用螺丝固定。
- 在使用前需要进行预热，通常需要30分钟左右。
- 传感器使用寿命一般为1-2年，需要定期更换。
参数规格：
- 测量范围：0-25%VOL
- 线性误差：±1%VOL
- 分辨率：0.1%VOL
- 响应时间：T90 < 5s
- 工作温度：-20°C至+50°C
- 工作湿度：15-90%RH
- 输出信号：4-20mA
- 尺寸：76mm x 33mm x 28mm
- 重量：约75g
需要注意的是，HONEYWELL CC-TAOX01是一款工业用传感器，使用前需要仔细阅读产品手册，并按照要求进行安装和操作。
HONEYWELL CC-TAOX01 is an industrial oxygen sensor, mainly used to monitor oxygen concentration and control process. The following are the features, use methods and parameter specifications of the product:
Features:
HONEYWELL CC-TAOX01 adopts the electrochemical principle, which can accurately and quickly monitor the oxygen concentration.
The sensor has fast response speed and can reach 95% response in 5 seconds.
CC-TAOX01 has automatic calibration function, which can be automatically calibrated during use to maintain the accuracy of the sensor.
The sensor has high accuracy and stability, and can operate stably for a long time in harsh environment.
usage method:
CC-TAOX01 needs to be connected with the oxygen detector or controller, and can output the measurement results through 4-20mA signal.
When installing the sensor, insert it into the mounting bracket and fix it with screws.
Preheating is required before use, which usually takes about 30 minutes.
The service life of the sensor is generally 1-2 years and needs to be replaced regularly.
Parameter specification:
Measuring range: 0-25% VOL
Linear error: ± 1% VOL
Resolution: 0.1% VOL
Response time: T90<5s
Operating temperature: - 20 ° C to+50 ° C
Working humidity: 15-90% RH
Output signal: 4-20mA
Size: 76mm x 33mm x 28mm
Weight: about 75g
It should be noted that HONEYWELL CC-TAOX01 is an industrial sensor. Before use, read the product manual carefully, and install and operate it according to the requirements.
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
