BENTLY 3500/93-07-01-02-00振动监测器
1.产 品 介 绍
品牌：BENTLY
型号说明：BENTLY 3500/93-07-01-02-00振动监测器
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
BENTLY 3500/93-07-01-02-00是一种振动监测模块，它可以用于监测旋转机械设备的振动情况。以下是该产品的特点介绍、使用方法和参数规格：
特点介绍：
- BENTLY 3500/93-07-01-02-00可用于监测多种旋转设备的振动情况，如涡轮机、发电机、离心泵等。
- 它采用了数字信号处理技术，能够实时监测振动信号，并对其进行处理和分析，以提供更准确的振动信息。
- 该产品可以通过多种通信接口与其他设备进行数据交换，如Modbus、Ethernet等。
- 它具有可扩展性，可与其他BENTLY 3500系列模块组合使用，以实现更全面的振动监测功能。
使用方法：
- 首先，将BENTLY 3500/93-07-01-02-00模块安装到机架上，并将传感器连接到模块的输入端口。
- 然后，通过模块上的控制面板设置相关参数，如传感器类型、采样频率等。
- 最后，通过接口连接到其他设备，以实现数据交换和监测结果的显示。
参数规格：
- 采样频率：最高10kHz
- 输入电压范围：±10V
- 传感器类型：可支持加速度、速度、位移传感器
- 数据输出格式：模拟输出信号、数字信号、状态信号
- 工作温度范围：-40°C到+70°C
需要注意的是，使用BENTLY 3500/93-07-01-02-00模块进行振动监测时，应按照厂家提供的操作手册进行操作，并根据实际情况进行参数设置。
BENTLY 3500/93-07-01-02-00 is a vibration monitoring module, which can be used to monitor the vibration of rotating mechanical equipment. The following are the features, use methods and parameter specifications of the product:
Features:
BENTLY 3500/93-07-01-02-00 can be used to monitor the vibration of various rotating equipment, such as turbines, generators, centrifugal pumps, etc.
It adopts digital signal processing technology, which can monitor vibration signals in real time, process and analyze them to provide more accurate vibration information.
The product can exchange data with other devices through various communication interfaces, such as Modbus, Ethernet, etc.
It is scalable and can be combined with other BENTLY 3500 series modules to achieve more comprehensive vibration monitoring functions.
usage method:
First, install the BENTLY 3500/93-07-01-02-00 module on the rack and connect the sensor to the input port of the module.
Then, set relevant parameters through the control panel on the module, such as sensor type, sampling frequency, etc.
Finally, it is connected to other devices through the interface to realize data exchange and display of monitoring results.
Parameter specification:
Sampling frequency: up to 10kHz
Input voltage range: ± 10V
Sensor type: can support acceleration, speed and displacement sensors
Data output format: analog output signal, digital signal, status signal
Operating temperature range: - 40 ° C to+70 ° C
It should be noted that when using the BENTLY 3500/93-07-01-02-00 module for vibration monitoring, the operation should be carried out according to the operation manual provided by the manufacturer, and the parameters should be set according to the actual situation.
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
