BENTLY 3500/50M转速表模块
1.产 品 介 绍
品牌：BENTLY
型号说明：BENTLY 3500/50M转速表模块
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
BENTLY 3500/50M是一种机械振动监测和分析仪器，可用于监测旋转机械的运行状况。下面是一些关于该产品的特殊点介绍和映射：使用
特点介绍：
- BENTLY 3500/50M可以通过检测仪器的振动、温度和速度等参数，来实时监测仪器设备的运行状况。
- 它可以监测不同类型的机械振动，包括轴向、横向和横向振动。
- 它支持多种监测传感器类型，包括速度计、速度计和位移传感器。
- 它具有高度灵魂活性和可扩展性，可以与其他BENTLY产品配套使用，以扩展其功能。
使用方法：
- 首先，将BENTLY 3500/50M安装在要监控的机器设备上，并连接传感器到仪器上。
- 然后，使用仪器的软件界面设置监视参数，例如振动警报值和警报警报值等。
- 最后，通过观察仪器上的数据来监控仪器设备的运行状况，并及时处理任何异常情况。
参考数据：
- 测量范围：从0到2000Hz的机械振动信号。
- 采集率：最高达12.8kHz的采集率。
- 传感器类：支持多种速度计、速度计和位置传感器。
- 数据存储器：内部设置存储器，可存储高达10000个测量数据点。
- 数据通信：支持RS232、RS485、以太网等多种通信接口。
- 其他特性：支持远程监控和控制、数据报告生成和诊断等功能。
BENTLY 3500/50M is a mechanical vibration monitoring and analysis instrument, which can be used to monitor the operation of rotating machinery. Here are some special points about the product and mapping: using
Features:
BENTLY 3500/50M can monitor the operation status of instruments and equipment in real time by detecting the vibration, temperature, speed and other parameters of the instrument.
It can monitor different types of mechanical vibration, including axial, transverse and transverse vibration.
It supports a variety of monitoring sensor types, including speedometer, speedometer and displacement sensor.
It has high soul activity and scalability, and can be used with other BENTLY products to expand its functions.
usage method:
First, install the BENTLY 3500/50M on the machine equipment to be monitored and connect the sensor to the instrument.
Then, use the software interface of the instrument to set monitoring parameters, such as vibration alarm value and alarm alarm value.
Finally, monitor the operation of the instrument and equipment by observing the data on the instrument, and deal with any abnormal situation in time.
Reference data:
Measuring range: mechanical vibration signal from 0 to 2000Hz.
Acquisition rate: up to 12.8 kHz.
Sensor class: support a variety of speedometers, speedometers and position sensors.
Data memory: internal setting memory can store up to 10000 measurement data points.
Data communication: support RS232, RS485, Ethernet and other communication interfaces.
Other features: support remote monitoring and control, data report generation and diagnosis and other functions.
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
