NI PXI-6251模拟输出通道
1.产 品 介 绍
品牌：NI
型号说明：NI PXI-6251模拟输出通道
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
NI PXI-62511.在距ControlNet BNC连接器一米范围内为抽头选择合适的位置。选择抽头位置时，请记住引入电缆和中继电缆的布线。它们不应靠近高压电缆。避免过度弯曲主干电缆。2.水龙头可以以各种方式安装，例如使用DIN导轨或拧入合适的结构。即使抽头未安装在DIN导轨上，也应使用通用安装支架，NI PXI-6251以避免与导电结构电连接。3.将分接电缆连接到BNC连接器。启动系统之前，应测试所有ControlNet电缆连接。检查应用连接器的拉力。4.通过将200-RACN模块前面的两个开关（x10和x1）转到正确位置，定义网络节点地址：–机架I/O。应为200个RACN选择02-99范围内的节点地址。–200系列I/O-单击200-ACN模块前面的按钮开关。应为200个ACN选择02-99范围内的节点地址。–CI865-节点地址固定为01。NI PXI-6251
1. Select a suitable location for the tap within one meter from the ControlNet BNC connector. When selecting the tap location, keep in mind the routing of the drop and trunk cables. They should not be routed close to high-voltage cables. NI PXI-6251Avoid bending the trunk cable too much. 2. The tap can be mounted in various ways, for example using a DIN rail or screwed into a suitable structure. Even if the tap is not mounted on a DIN rail, the universal mounting bracket should be used to avoid galvanic connection to a conducting structure. 3. Connect the tap drop cable to the BNC connector. Before starting up the system, all ControlNet cable connections should be tested. Check the pulling strength of applied connectors. 4. Define the network node address: – Rack I/O - by turning the two switches (x10 and x1) on front of the 200- RACN module to the correct position. A node address in the range 02-99 should be selected for the 200-RACNs. – NI PXI-6251Series 200 I/O - by clicking the push button switches on the front of the 200-ACN module. A node address in the range 02-99 should be selected for the 200-ACNs. – CI865 - The node address is fixed to 01.NI PXI-6251
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
