REXROTH CSB01.1C-PL-ENS-NNN-NN-S-NN-FW驱动器控制器
1.产 品 介 绍
品牌：REXROTH
型号说明：REXROTH CSB01.1C-PL-ENS-NNN-NN-S-NN-FW驱动器控制器
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
重置按下并快速释放REXROTH CSB01.1C-PL-ENS-NNN-NN-S-NN-FW控制器的前面板重置按钮可启动系统重置。COLD（冷）和WARM（暖）复位模式可用。默认情况下，162Bug处于COLD模式。在COLD重置过程中，系统将进行完全初始化，就像控制器刚刚通电一样。所有静态变量（包括磁盘设备和控制器参数）都恢复到其默认状态。断点表和偏移寄存器被清除。目标寄存器无效。清除输入和输出字符队列。板载设备（计时器、串行端口等）复位，两个串行端口重新配置为默认状态。在WARM重置期间，REXROTH CSB01.1C-PL-ENS-NNN-NN-S-NN-FW将保留162Bug变量和表，以及目标状态寄存器和断点。如果处理器停止或162Bug环境丢失（矢量表被破坏、堆栈损坏等），则必须使用重置。注意：请确保快速释放重置按钮，以避免更改DRAM内容。按住该按钮可能会抑制DRAM刷新，并导致某些板上的内存丢失。
Reset Pressing and quickly releasing the REXROTH CSB01.1C-PL-ENS-NNN-NN-S-NN-FW controller’s front panel RESET button initiates a system reset. COLD and WARM reset modes are available. By default, 162Bug is in COLD mode. During COLD reset, a total system initialization takes place, as if the controller had just been powered up. All static variables (including disk device and controller parameters) are restored to their default states. The breakpoint table and offset registers are cleared. REXROTH CSB01.1C-PL-ENS-NNN-NN-S-NN-FWThe target registers are invalidated. Input and output character queues are cleared. Onboard devices (timer, serial ports, etc.) are reset, and the two serial ports are reconfigured to their default state. During WARM reset, the 162Bug variables and tables are preserved, as well as the target state registers and breakpoints. Reset must be used if the processor ever halts, or if the 162Bug environment is ever lost (vector table is destroyed, stack corrupted, etc.). Note Ensure that the RESET button is released quickly, to avoid altering the DRAM contents. Holding the button down may inhibit the DRAM refresh and cause memory loss on some boards.REXROTH CSB01.1C-PL-ENS-NNN-NN-S-NN-FW
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
