REXROTH HCS02.1E-W0054-A-03-NNNN伺服驱动器
1.产 品 介 绍
品牌：REXROTH
型号说明：REXROTH HCS02.1E-W0054-A-03-NNNN伺服驱动器
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
REXROTH HCS02.1E-W0054-A-03-NNNN网络自动引导由NIOT和ENV命令中包含的参数控制。这些参数允许选择特定的引导设备、系统和文件，并允许对引导延迟进行编程。有关更多信息，请参阅第5章中的ENV命令。重新启动系统您可以通过三种不同的方式将系统初始化为已知状态：重置、中止和中断。在某些情况下，REXROTH HCS02.1E-W0054-A-03-NNNN每种语言都具有比其他语言更合适的特点。调试器在重置条件下具有特殊功能。同时按下RESET（复位）和ABORT（中止）开关可激活此功能。此功能指示调试器使用ROM中的默认设置/操作参数，而不是NVRAM中的设置/操作。如果您的设置/操作参数损坏或不符合健全性检查，则可以使用此功能。有关ROM默认值，请参阅ENV命令（第5章）。REXROTH HCS02.1E-W0054-A-03-NNNN
Network Auto Boot is controlled by parameters contained in the NIOT and ENV commands. These parameters allow the selection of specific boot devices, systems, and files, and allow programming of the boot delay. Refer to the ENV command in REXROTH HCS02.1E-W0054-A-03-NNNNChapter 5 for additional information. Restarting the System You can initialize the system to a known state in three different ways: reset, abort, and break. Each has characteristics which make it more appropriate than the others in certain situations. The debugger has a special feature upon a reset condition. This feature is activated by depressing the RESET and ABORT switches at the same time. This feature instructs the debugger to use the default setup/operation parameters in ROM versus your setup/operation parameters in NVRAM. This feature can be used in the event your setup/operation parameters are corrupted or do not meet a sanity check. Refer to the ENV command (Chapter 5) for the ROM defaults.REXROTH HCS02.1E-W0054-A-03-NNNN
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
