REXROTH HMD01.1N-W0020-A-07-NNNN调节阀
1.产 品 介 绍
品牌：REXROTH
型号说明：REXROTH HMD01.1N-W0020-A-07-NNNN调节阀
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
REXROTH HMD01.1N-W0020-A-07-NNNN这些可读跳线可以作为存储器控制器（MC2芯片）ASIC上的寄存器（$FFF4202D）读取。当跳线断开时，位值读取为1，当跳线接通时，位读取为0。此跳线块（标头J22）包含8位。有关MC2芯片的更多信息，请参阅《REXROTH HMD01.1N-W0020-A-07-NNNN嵌入式控制器程序员参考指南》。REXROTH HMD01.1N-W0020-A-07-NNNNBug保留/定义四个低阶位（GPI3至GPI0）。以下是调试器保留/定义的位的描述：Bit J22 Pins description Bit#0（GPI0）15-16当设置为1（高）时，指示调试器将本地静态RAM用于其工作页（即变量、堆栈、矢量表等）。当设置为0（高），指示调试器使用Flash或PROM中的默认设置/操作参数与NVRAM中的用户设置/操作。这与同时按下RESET和ABORT开关相同
These readable jumpers can be read as a register (at $FFF4202D) on the Memory Controller (MC2 chip) ASIC. The bit values are read as a one when the jumper is off, and as a zero when the jumper is on. This jumper block (header J22) contains eight bits. Refer also to theREXROTH HMD01.1N-W0020-A-07-NNNNEmbedded Controller Programmer’s Reference Guide for additional information on the MC2 chip. The MVME162Bug reserves/defines the four lower order bits (GPI3 to GPI0). The following is the description for the bits reserved/defined by the debugger: Bit J22 Pins Description Bit #0 (GPI0) 15-16 When set to 1 (high), instructs the debugger to use local Static RAM for its work page (i.e., variables, stack, vector tables, etc.).When set to 1 (high), instructs the debugger to use the default setup/operation parameters in Flash or PROM versus the user setup/operation parameters in NVRAM. This is the same as depressing the RESET and ABORT switches at the same time.REXROTH HMD01.1N-W0020-A-07-NNNN
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
