REXROTH CML40.2-NP-330-NA-NNNN-NW控制
1.产 品 介 绍
品牌：REXROTH
型号说明：REXROTH CML40.2-NP-330-NA-NNNN-NW控制
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
REXROTH CML40.2-NP-330-NA-NNNN-NW扩展5 V直流电源如果5 V电路的电源要求大于18 A，则必须使用额外的电源。为此，可使用B 9361组装套件，该套件提供了在附加子架中使用三个24 V/5 V电源REXROTH CML40.2-NP-330-NA-NNNN-NW以及监控模块REXROTH CML40.2-NP-330-NA-NNNN-NW的可能性。附加电源的5V输出电路不得与中央机架的输出电路并联切换。REXROTH CML40.2-NP-330-NA-NNNN-NW除此之外，它们还提供自己的电路。参考极GND必须连接在一起。附加电源（装配套件B 9361）的电源单元发出监控信号。这些信号可从子架后侧的XG1接线盒获取（见B 9361组装套件）。它们可以通过数字输入模块输入PLC。在PLC的逻辑中，信号用于触发错误消息。REXROTH CML40.2-NP-330-NA-NNNN-NW
Extension of the 5 V DC Power Supply If the power requirements of the 5 V circuits is > 18 A an additional power supply has to be used. For this purpose the B 9361 assembly kit can be used which provides the possibility of applying three 24 V/5 V power supplies REXROTH CML40.2-NP-330-NA-NNNN-NW together with the monitoring moduleREXROTH CML40.2-NP-330-NA-NNNN-NW in an additional subrack. The 5 V output circuits of the additional power supply must not be switched in parallel with the ones from the central rack. Apart from them they supply their own circuits. The reference poles GND have to be connected together. The power supply units of the additional power supply (assembly kit B 9361) emit monitoring signals. These signals can be taken from the XG1 terminal block on the rear side of the subrack (see B 9361 assembly kit). They can be fed into the PLC via digital input modules. In the logic of the PLC the signals are used to trigger an error message.REXROTH CML40.2-NP-330-NA-NNNN-NW
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.关 于 相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
