REXROTH HVR02.2-W010N伺服驱动器
1.产 品 介 绍
品牌：REXROTH
型号说明：REXROTH HVR02.2-W010N伺服驱动器
优势：供应进口原装正品，专业停产配件。
公司主营特点：主营产品各种模块/卡件，控制器，触摸屏，伺服驱动器。
2.产 品 详 情 资 料：
REXROTH HVR02.2-W010N5V直流电源和配电5V直流电源不必额外布线，因为它已经是安装的一部分。为向I/O机架供电，中央机架后侧提供了具有相应GND的5V DC电源。微处理器系统所需的5 V DC电源以及I/O模块的控制电流由系统的24 V DC电源通过带有F 7126标识的时钟24 V DC/5 V DC供电模块产生。REXROTH HVR02.2-W010N一个中央机架最多可配备3个电源模块。电源模块并联切换。一个或两个电源模块通常能够为PES供电。另一个电源模块用于提高可用性。监控模块F 7131检查电源模块的输出电压是否欠压和故障。在电源模块故障的情况下，操作系统通过系统变量向用户的程序提供该信息。如果5 V直流系统电源故障，中央模块上的硬件时钟和sRAM由中央模块上一个锂电池缓冲。电源监控模块F 7131上的两个锂电池用于缓冲协处理器模块上的sRAM。REXROTH HVR02.2-W010N
5 V DC Supply and Distribution The 5 V DC power supply does not have to be wired extra as it is already part of the installation. To supply the I/O racks the 5 V DC power supply with corresponding GND is available at the rear side of the central rack. The 5 V DC power needed for the microprocessor system and as control current for the I/O modules is generated from the 24 V DC power of the system via clocked 24 V DC / 5 V DC power supply modules bearing the F 7126 identification. One central rack can be equipped with a maximum of 3 power supply modules. The power supply modules are switched in parallel. One or two power supply modules are usually able to supply the PES. A further power supply module is used to increase availability. The output voltage of the power supply modules is checked as to undervoltage and failure by a monitoring moduleREXROTH HVR02.2-W010N.REXROTH HVR02.2-W010NIn case of a faulty power supply module the operating system supplies the user's program via a system variable with this information. In case the 5 V DC system power fails hardware clock and sRAM on the central module are buffered by one lithium battery on the central module. Two lithium batteries on the power supply monitoring module F 7131 are to buffer the sRAM on the coprocessor module.
3.产 品 展 示
4.公 司 优 势 主 营 产 品
5.关 于 相 关 产 品 展 示
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
