NI PXIe-5665矢量信号分析仪
1.产 品 介 绍
品牌：NI
型号：NI PXIe-5665
产品说明：矢量信号分析仪
优势：供应进口原装正品，专业停产配件。
2.产 品 详 情 资 料：
NI PXIe-5665将该电缆另一端的母连接器（9针或25针）连接到所选编程（或其他串行）设备上的RS-232公连接器（串行端口）。如果您自己制作电缆，请使用与串行设备兼容的连接器。请注意，6英尺RS-422/RS-485兼容电缆的两端是相同的；15针公连接器连接在两端。将该电缆的一端连接到转换器上RS-422/RS-485连接器上的15针母连接器。将该电缆另一端连接到15针母接头，NI PXIe-5665该接头连接到Series 90-30或Series 90-70 PLC上的RS485兼容串行端口。对于Series 90-30 PLC，可通过打开电源上的铰链门来访问此连接器。NI PXIe-5665Series 90-70 PLC的串行端口连接器位于CPU模块上，可通过打开模块上的铰链门进行访问。
Connect the female connector (9-pin or 25-pin) on the opposite end of this cable to the male RS-232 connector (serial port) on the selected programming (or other serial) device.NI PXIe-5665 If you build you own cable, NI PXIe-5665use a connector that is compatible with your serial device.Notice that both ends of the 6-foot RS-422/RS-485 compatible cable are the same; a 15-pin male connector is attached at both ends. Connect one end of this cable to the 15-pin female connector on the RS-422/RS-485 connector on the converter.Connect the other end of this cable to the 15-pin female connector, which interfaces to the RS485 compatible serial port on the Series 90-30 or Series 90-70 PLC. For the Series 90-30 PLC, this connector is accessed by opening the hinged door on the power supply. The serial port connector for the Series 90-70 PLC is on the CPU module, and is accessed by opening the hinged door on the module.NI PXIe-5665
3.产 品 展 示
4.公 司 优 势
5.关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
