EMERSON 1C31199G01控制器
1.产 品 介 绍
品牌：EMERSON
型号：EMERSON 1C31199G01
产品说明：控制器
优势：供应进口原装正品，专业停产配件。
快递方式：国内顺丰、德邦、京东快递包邮，按照实际报价货期发货
2.产 品 详 情 资 料：
EMERSON 1C31199G01控制器梯形图屏幕上显示的触点、连接和线圈（通电或通电）以增强亮度显示，允许通过程序跟踪信号。可以对照模块状态灯、电压等检查物理输入EMERSON 1C31199G01和输出信号（%Q和%AQ）的地址，以验证硬件是否正常工作。配置屏幕通常，以下信息可从系统文档中获得。EMERSON 1C31199G01但是，如果它们不可用，则可以使用配置屏幕来确定：•软件配置是否与实际硬件匹配。有时，在进行故障排除时，模块错误地安装在错误的插槽中。这将在两个故障表之一中创建一个故障。可以从配置屏幕中确定正确的配置。特定模块正在使用故障表的内存地址有两个故障表，即“PLC故障表”和“I/O故障表”。可以使用PLC编程软件查看故障表。EMERSON 1C31199G01
Ladder Screens Contacts, connections, and coils displayed on the ladder screens that are ON (passing power or energized) are displayed in enhance brightness, allowing the tracing of signals through the program. Addresses that refer to physical input (%I and %AI) and output signals EMERSON 1C31199G01can be checked against module status lights, voltages, etc. to verify that the hardware is working properly. Configuration Screens Normally, the following information is obtained from the system documentation. However, if they are not available, the configuration screens can be used to determine:• If the software configuration matches the actual hardware.EMERSON 1C31199G01 Sometimes, while troubleshooting, a module is installed in an incorrect slot by mistake. This will create a fault in one of the two fault tables. The correct configuration can be determined from the Configuration Screens.The memory addresses that a particular module is using Fault Tables There are two fault tables, the “PLC Fault Table,” and the “I/O Fault Table.” The fault tables can be viewed using the PLC programming software.EMERSON 1C31199G01
3.产 品 展 示
4.关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
