A-B SK-G9-GDB1-D292 347594-A0电源接口板
1.产 品 介 绍
品牌：A-B
型号：A-B SK-G9-GDB1-D292 347594-A0
产品说明：电源接口板
优势：供应进口原装正品，专业停产配件。
快递方式：国内顺丰、德邦、京东快递包邮，按照实际报价货期发货
2.产 品 详 情 资 料：
A-B SK-G9-GDB1-D292 347594-A0电源接口板输出模块LED指示灯当梯形图程序中打开离散输出地址（%Q）时，相应的输出LED应亮起，指示信号到达模块。Ŷ如果灯不亮，A-B SK-G9-GDB1-D292 347594-A0则模块可能有故障或LED灯可能坏。如果灯亮但输出设备不工作，则可以在模块的接线板或接线板上进行电压检查。如果存在正确的电压电平，则应检查输出设备或接线。如果输出模块的输出均不工作，则可能是外部（现场）输出电源故障、未通电或未正确连接。（输入和输出设备由外部电源供电，而不是从模块内部供电）。如果输出模块是具有内置保险丝的类型（有些带有电子短路保护），则如果保险丝熔断，则上图所示的保险丝指示灯LED（标有“F”）将点亮。A-B SK-G9-GDB1-D292 347594-A0
Output Module LED Indicators When a discrete output address (%Q) is turned on in the ladder program, the corresponding output LED should light to indicate that the signal reached the module. Ŷ If the light does not turn ON, the module may be defective or the LED light may be bad.If the light turns on but the output device doesn’t operate,A-B SK-G9-GDB1-D292 347594-A0 a voltage check can be made on the module’s terminal board or block. If the correct voltage level is present there, the output device or wiring should be checked. If none of an output module’s outputs are working, it may be that the external (field) output power supply is defective, is not powered up or is not connected properly. (Input and output devices are powered from an external power supply, not from inside the module). If the output module is a type that has built-in fuses (some have electronic short circuit protection instead), the Fuse Indicator LED (labeled “F”), shown in the previous figure, will light if a fuse blows.A-B SK-G9-GDB1-D292 347594-A0
3.产 品 展 示
4.关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
