GE TP2020SS RMS-9工控控制卡件
1.产 品 介 绍
品牌：GE
型号：GE TP2020SS RMS-9
产品说明：工控控制卡件
特点：模块/卡件，控制器，触摸屏，伺服驱动器
优势：供应进口原装正品，专业停产配件。
快递方式：国内顺丰、德邦、京东快递包邮，按照实际报价货期发货
2.产 品 详 情 资 料：
GE TP2020SS RMS-9工控控制卡件为了在Series 90-30 PLC的端口2上使用RS-232电缆，必须按照上述串行端口引脚分配制作专用电缆，或者必须使用WYE电缆。WYE电缆允许PCM或ADC使用标准Series 90-70电缆（IC690CBL701/702/705）。安装CMM模块时，GE TP2020SS RMS-9根据GFK-0582系列PLC串行通信手册第8章中的说明，将WYE电缆与为CMM模块构建的电缆一起使用。该电缆用于32点高密度模块，GE TP2020SS RMS-9该模块的前部安装有50针Honda公连接器。延长电缆的一端有一个50针阳连接器，另一端有50针阴连接器。该电缆提供从模块到安装在DIN导轨式接线板组件上的连接器的连接。该电缆是针对针连接的（即，针1到针1，针2到针2等）GE TP2020SS RMS-9。
In order to use an RS-232 cable on port 2 GE TP2020SS RMS-9of the Series 90-30 PLC, either a special cable must be made following the serial port pin assignments shown above or a WYE cable must be used. The WYE cable allows use of standard Series 90-70 cables (IC690CBL701/702/705) for the PCM or ADC. When installing the CMM module, use the WYE cable in conjunction with cables that you build for the CMM module according to directions in Chapter 8 of GFK-0582, the Series 90 PLC Serial Communications Manual.This cable is used with 32 point High Density modules that have a 50-pin male GE TP2020SS RMS-9Honda connector mounted on the front of the module. The extension cables have a 50-pin male connector on one end and a 50-pin female connector on the other end. This cable provides a connection from the module to a connector mounted on a DIN-rail-mounted terminal block assembly. This cable is wired pin-to-pin (That is, pin 1 to pin 1, pin 2 to pin 2, etc.).GE TP2020SS RMS-9
3.产 品 展 示
4.关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
