FOXBORO K0143AAAN电源模块
1.产 品 介 绍
品牌：FOXBORO
型号：FOXBORO K0143AAAN电源模块
产品说明：模块卡件
特点：模块/卡件，控制器，触摸屏，伺服驱动器
优势：供应进口原装正品，专业停产配件。
快递方式：国内顺丰、德邦、京东快递包邮，按照实际报价货期发货
2.产 品 详 情 资 料：
FOXBORO K0143AAAN电源模块电缆功能手持式编程器电缆提供允许手持式编程仪和可编程逻辑控制器通信的连接。该电缆还为HHP提供电源连接，以及向PLC指示HHP连接至PLC串行端口的信号。它还可用于将PLC上的RS-485串行端口连接至RS422/RS-485至RS-232转换器FOXBORO K0143AAAN。电缆规格预接线电缆FOXBORO K0143AAAN长6英尺（2米）。如果连接到转换器需要不同长度的电缆，请参阅以下信息以了解规格和接线信息。如果您打算建立自己的电缆，则此信息至关重要。以下列出了该电缆的建议电缆类型，具体取决于电缆的长度。与30英尺的电缆类型相同。此外，PLC无法为转换器提供+5 VDC逻辑电源。它必须由连接到连接器转换器端+5V和SG引脚的外部电源提供。PLC接头上的+5V引脚不得连接到电缆。FOXBORO K0143AAAN
Function of cable The Hand-Held Programmer cable provides the connections that allow the Hand-Held Programmer and the Programmable Logic Controller to communicate. This cable also provides the power connections for the HHP, and a signal which indicates to the PLC that the HHP is attached to the PLC serial port. It can also be used to connect the RS-485 serial port on the PLC to the RS422/RS-485 to RS-232 converter FOXBORO K0143AAAN. Cable Specifications The prewired cableFOXBORO K0143AAANis 6 feet (2 meters) long. If a different length cable is required for connection to the converter, refer to the information below for specifications and wiring information. This information is essential if you intend to build your own cable. The recommended cable types for this cable are listed below and depend on the length of the cable.Same as for 30 feet. In addition, the+5 VDC logic power source for the converter cannot be supplied by the PLC. It must be provided by an external power supply connected to the +5V and SG pins at the converter end of the connector. The +5V pin at the PLC connector must not be connected to the cable. FOXBORO K0143AAAN
3.产 品 展 示
4.关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
