ABB CMA135 3DDE300415发电机继电器端子板
产品详情资料：
ABB CMA135 3DDE300415发电机继电器端子板布线标准密度（16点或以下）离散模块有三种基本布线方法：ABB CMA135 3DDE300415直接法。将现场设备（开关、继电器等）的电线直接连接至模块接线板上的螺钉。ABB CMA135 3DDE300415端子条法。在控制外壳内安装接线板，并将接线板与模块的接线板连接。然后将现场设备连接到接线板。ABB CMA135 3DDE300415接线板快速连接装配方法。接线板快速连接组件有三个部件：面板、电缆和接线板。面板卡在I/O模块上，代替其正常端子板。该面板有一个与电缆匹配的连接器。电缆依次插入接线板上的接头。接线板安装在DIN导轨上，位于外壳中方便的位置。接线盒用于连接到现场设备，如开关和继电器。与端子排方法相比，该方法平均每个模块可节省两小时以上的布线时间。有关详细信息，请参阅附录J“接线板快速连接组件”ABB CMA135 3DDE300415
ABB CMA135 3DDE300415Wiring Standard Density (16-Point or Less) Discrete Modules There are three basic wiring methods: Ŷ Direct Method. Run the wires from the field devices (switches, relays, etc.) directly to the screws on the modules’ terminal boards. Ŷ Terminal Strip Method. Mount a terminal strip inside the control enclosure and wire from the terminal strip to the modules’ terminal boards. Then wire field devices to the terminal strip. Ŷ Terminal Block Quick Connect Assembly Method. The Terminal Block Quick Connect Assembly has three pieces: a faceplate, a cable, and a terminal block. The faceplate snaps onto an I/O module in place of its normal terminal board. This faceplate has a connector that mates with the cable. In turn, the cable plugs into a connector on the terminal block. The terminal block mounts on a DIN-rail in a convenient place in your enclosure. The terminal block is used for connecting to field devices such as switches and relays. This method saves, on the average, over two hours of wiring time per module when compared with the Terminal Strip method. For more information, see Appendix J, “Terminal Block Quick Connect Components.”ABB CMA135 3DDE300415
品牌：ABB
型号：ABB CMA135 3DDE300415
产品说明：发电机继电器端子板
特点：模块/卡件，控制器，触摸屏，伺服驱动器
优势：供应进口原装正品，专业停产配件。
产 品 展 示
关 于 我 们
本篇文章出自瑞昌明盛自动化设备有限公司官网，转载请附上此链接:http://www.jiangxidcs.com
