ABB LPS01位置模块
品牌：ABB
型号：ABB LPS01
产品说明：位置模块
ABB LPS01位置模块中文资料：
ABB LPS01第6章讨论了IC693ACC315电池附件套件，当从嵌入式CPU基板上卸下电源时，该套件可用于维护内存内容。Ŷ311、313或323型基板上没有配置开关或跳线。Ŷ默认情况下，嵌入式CPU基板始终分配为零号机架（0）。模块化CPU基板（图3-4和3-5）\374；电源模块必须插入这些基板的左侧插槽（未编号）。ABB LPS01左侧插槽具有唯一的大小和类型，仅支持电源模块。ŶCPU模块（或特殊选件模块）必须安装在这些底板的插槽1中。插槽1是唯一的大小和类型，仅支持CPU模块或特殊选项模块，如FIP远程I/O扫描仪（IC693BEM330）。插槽1标记为CPU/1。Ŷ编号为2及以上的插槽具有唯一的大小和类型，仅支持I/O或选件模块。Ŷ支持扩展和远程基板，因此25针D型母扩展连接器位于基板的右端，用于连接扩展或远程基板。Ŷ由于CPU是模块化的，如果需要其他功能，可以将其更换或更改为其他类型。ABB LPS01
英文资料
Chapter 6 discusses the IC693ACC315 Battery Accessory kit that can be used to maintain memory contents when the Power Supply is removed from an embedded CPU baseplate. Ŷ There are no configuration switches or jumpers on the Model 311, 313, or 323 baseplates. Ŷ An embedded CPU baseplate is always assigned, by default, Rack Number Zero (0).Modular CPU Baseplates (Figures 3-4 and 3-5) Ŷ A Power Supply module must be plugged into the left slot (which is not numbered) of these baseplates. The left slot is a unique size and type that only supports a Power Supply module. Ŷ A CPU module (or a special Option module) must be installed in Slot 1 of these baseplates. Slot 1 is a unique size and type that only supports a CPU module or a special Option module like the FIP Remote I/O Scanner (IC693BEM330). Slot 1 is labeled CPU/1. Ŷ Slots numbered 2 and above are of a unique size and type that only supports I/O or Option modules. Ŷ Expansion and Remote baseplates are supported, so a 25-pin D-type female expansion connector is located at the right end of the baseplate for connecting to an Expansion or Remote baseplate. Ŷ Since the CPU is modular, it can be replaced or changed to a different type if additional features are desired.ABB LPS01
每 日 展 示
公 司 主 营 优 势
应 用 行 业
