ABB IMCOM04传输模块
ABB IMCOM04启动ScreenMaker您可以从“脱机”选项卡或“联机”选项卡启动ScreenMaker。1。在脱机或联机选项卡中，单击ScreenMaker。ScreenMaker显示为RobotStudio功能区中的一个选项卡。2.单击ScreenMaker选项卡启动ScreenMaker。可以建立与所有连接的VC的连接。可以建立到所有连接的实际控制器的连接。“项目”上下文菜单中出现“联机”选项ABB IMCOM04。选择此选项可从脱机模式切换到联机模式。“脱机”选项出现在“项目”上下文菜单中。选择此选项可从联机模式切换到脱机模式。在脱机模式1下重新启动VC。在布局浏览器中，选择要重新启动的控制器。2.单击重新启动，然后选择以下选项之一：I-start使用当前系统和默认设置重新启动VC。P-start使用当前系统重新启动VC并重新安装RAPID。在联机模式1下重新启动实际控制器。在布局浏览器中，选择要重新启动的控制器。2.单击重新启动，然后选择以下选项之一：热启动重新启动实际控制器并激活对系统所做的更改。高级可使用以下高级重启选项重启控制器：•I启动•P启动•X启动•C启动•B启动ABB IMCOM04
ABB IMCOM04传输模块
Launching ScreenMaker You can launch ScreenMaker either from the Offline tab or from the Online tab. 1. In the Offline or Online tab, click ScreenMaker. The ScreenMaker appears as a tab in the RobotStudio ribbon. 2. Click ScreenMaker tab to launch ScreenMaker.the connection to all connected VCs can be estabished. the connection to all connected real controllers can be established. the option Online appears in the Project context menu. Select this option to switch from Offline mode to Online mode. the option Offline appears in the Project context menu. Select this option to switch from Online mode to Offline mode.Restarting a VC in Offline mode 1. In the Layout browser, select the controller to restart. 2. Click Restart and then select one of the following options:I-start Restarts the VC with the current system and the default settings. P-start Restarts the VC with the current system and reinstalls RAPID.Restarting a real controller in Online mode 1. In the Layout browser, select the controller to restart. 2. Click Restart and then select one of the following options:Warmstart Restarts the real controller and activates the changes made to the system. Advanced The controller can be restarted with the following advanced restart options: • I-start • P-start • X-start • C-start • B-start
公司主营优势
应用行业
