ABB ACS301-4P9-3工控控制卡件
ABB ACS301-4P9-3运算符要使用的逻辑运算符。以下列出了各种运算符：•AND•OR•XOR•NOT•NOP延迟输出信号的延迟时间。输入A第一个输入。InputB第二个输入。输出逻辑运算的结果。选择器低电平时，选择第一个输入。当为高时，选择第二个输入。InputA指定第一个输入。InputB指定第二个输入。ABB ACS301-4P9-3Output指定操作的结果。LogicSplit LogicSplit接受Input并将OutputHigh设置为与Input相同，将OutputLow设置为Input的倒数。当Input设置为高时，PulseHigh发送脉冲，当Input设置成低时，pulse low发送脉冲。Input指定输入信号。当输入为1时，OutputHigh变高（1）。当输入为0时，OutputLow变高（1）。脉冲高输入设置为高时发送脉冲。PulseLow当输入设置为低时发送脉冲。LogicSRLatch有一个稳定状态。•当Set=1、Output=1和InvOutput=0时•当Reset=1时，Output=0和InvOutput=1ABB ACS301-4P9-3
ABB ACS301-4P9-3工控控制卡件
Operator The logical operator to use. The following lists the various operators: • AND • OR • XOR • NOT • NOP Delay Time to delay the output signal.InputA The first input. InputB The second input. Output The result of the logic operation.Selector When low, the first input is selected. When high, the second input is selected. InputA Specifies the first input. InputB Specifies the second input. Output Specifies the result of the operation.LogicSplit The LogicSplit takes Input and sets OutputHigh to the same as Input, and OutputLow as the inverse of Input. PulseHigh sends a pulse when Input is set to high, and PulseLow sends a pulse when Input is set to low Input Specifies the input signal. OutputHigh Goes high (1) when input is 1. OutputLow Goes high (1) when input is 0. PulseHigh Sends pulse when input is set to high. PulseLow Sends pulse when input is set to low.TheLogicSRLatch has one stable state. • When Set=1, Output=1 and InvOutput=0 • When Reset=1, Output=0 and InvOutput=1ABB ACS301-4P9-3
公司主营优势
应用行业
