ABB XO16N1 1SBP260105R1001控制模块
ABB XO16N1 1SBP260105R1001创建目标1。在布局浏览器中，选择要在其中创建目标的工作对象。2.单击“创建目标”以打开一个对话框。3.选择要用于定位目标的参考坐标系：相对于用户定义坐标系UCS 4中活动工作对象工作对象的位置，在桩号world的世界坐标系中的绝对坐标系。在“点”框中，单击“添加新点”，然后在图形窗口中单击所需位置以设置目标的位置。也可以在“坐标”框中输入值，然后单击“添加”。5.输入目标的方向。图形窗口中将在选定位置显示初步交叉。如有必要，调整位置。要创建目标，请单击“创建”。6.如果要更改要为其创建目标的工作对象，请单击“更多”按钮展开“创建目标”对话框。在工作对象列表中，选择要在其中创建目标的工作对象。ABB XO16N1 1SBP260105R1001
ABB XO16N1 1SBP260105R1001Creating a target
1. In the Layout browser, select the workobject in which you want to create the target.
2. Click Create Target to bring up a dialog box.
3. Select the Reference coordinate system you want to use to position the target:absolute in the world coordinate system of
the station
World
relative to the position of the active
workobject
Work Object
in a user-defined coordinate system UCS 4. In the Points box, click Add New and then click the desired position in the graphics
window to set the position of the target. You can also enter the values in the Coordinates
boxes and click Add.
5. Enter the Orientation for the target. A preliminary cross will be shown in the graphics
window at the selected position. Adjust the position, if necessary. To create the target,
click Create.
6. If you want to change the workobject for which the target is to be created, expand the
Create Target dialog box by clicking the More button. In the WorkObject list, select the
workobject in which you want to create the target.
