ABB NDSI02传输模块
显示UCS栅格如果要显示UCS栅格，请选中该复选框。默认值：选中。栅格空间X通过在框中输入请求的值，在X坐标方向上更改UCS栅格空间。默认值：1000 mm（或其他单位的等效值）。栅格空间Y通过在框中输入请求的值，沿Y坐标方向更改UCS栅格空间。默认值：1000 mm（或其他单位的等效值）。显示坐标系如果要显示坐标系，请选中该复选框。默认值：选中。详细程度选择详细程度是自动、精细、中等还是粗略。默认值：自动。剔除后向三角形如果要忽略后向三角形，请选中该复选框。默认值：选中。消隐后向三角形可以提高图形性能，但如果模型中的曲面没有正确面对，则可能会产生意外的显示。启用双面照明如果要启用双面照明，请选中该复选框。默认值：清除。剔除小于的对象选择忽略对象的像素大小。默认值：2像素。
Show UCS Grid Select the check box if you want the UCS grid to be displayed.
Default value: selected.
Grid Space X Change the UCS grid space in the X coordinate direction by
entering the requested value in the box. Default value: 1000 mm
(or equivalent in other units).
Grid Space Y Change the UCS grid space in the Y coordinate direction by
entering the requested value in the box. Default value: 1000 mm
(or equivalent in other units).
Show coordinate system Select the check box if you want the coordinate systems to be
displayed. Default value: selected.Detail level Select if the detail level is to be Auto, Fine, Medium or Coarse.
Default value: Auto.
Cull back-facing
triangles
Select the check box if you want to ignore the back-facing
triangles. Default value: selected.
Culling back-facing triangles improves the graphics
performance but may give unexpected display if surfaces in
models are not faced correctly.
Enable twosided lighting Select the check box if you want to enable two-sided lighting.
Default value: cleared.
Cull objects smaller than Select the size in pixels under which objects will be disregarded.
Default value: 2 pixels.
