ABB SC610 3BSE001552R1数字输入模块
指定名称和位置要指定目标文件夹，请执行以下步骤：1。在“名称”框中，输入要创建的系统的名称。2.在路径框中，输入存储系统的系统目录的路径。您也可以单击浏览按钮并浏览到系统目录。3.单击“下一步”。查找备份要从备份查找系统，请执行以下步骤：1。在“备份文件夹”框中，输入备份文件夹的路径。或者，单击“浏览”按钮浏览到它。单击“下一步”。2.在媒体池框中，输入包含相应RobotWare程序的媒体池的路径。确认向导中现在显示的备份信息。单击下一步。您从System Builder访问的所有系统都存储在您的计算机上。如果希望在机器人控制器上运行系统，必须首先将其加载到控制器，然后需要重新启动。加载系统要将系统加载到控制器，请执行以下步骤：1。从System Builder对话框中，选择一个系统，然后单击Download to Controller（下载到控制器）以打开一个对话框。2.指定系统的目标控制器。
Specifying the name and location
To specify the destination folder, follow these steps:
1. In the Name box, enter a name for the system you are creating.
2. In the Path box, enter the path to the system directory in which you will store the system.
You can also click the Browse button and browse to the system directory.
3. Click Next.
Locating the backup
To locate a system from backup, follow these steps:
1. In the Backup folder box, enter the path to the backup folder. Alternatively, click the
Browse button to browse to it. Click Next.
2. In the Media Pool box, enter the path to the media pool containing the appropriate
RobotWare program. Confirm the backup information that now appears in the wizard.
Click Next.All systems you access from the System Builder are stored on your computer. If you wish to
run a system on a robot controller, you must first load it to the controller, which then requires
a restart.
Load a system
To load a system to a controller, follow these steps:
1. From the System Builder dialog box, select a system and then click Download to
Controller to bring up a dialog box.
2. Specify the Destination Controller for the system.
