ABB IMASI02模拟量输入模块
测量处理时间要测量处理时间，请执行以下步骤：1。在“模拟”选项卡上，单击“时钟”按钮。2.播放模拟或沿路径移动。当最后一个进程停止时，计时器停止。如果您在未停用“时钟”按钮的情况下启动另一个进程，则计时器将继续。3.要将时钟重置为零，请单击重置过程计时器。RAPID程序通常存储在工作站虚拟控制器上运行的系统中。要将程序复制到其他控制器上的系统，请将程序保存到PC上的文件中，然后将这些文件加载到目标控制器。您可以保存整个程序或特定模块。复制程序要将程序从一个控制器复制到另一个控制器，请执行以下步骤：1。在脱机浏览器中，选择包含要复制的程序的控制器。2.将程序保存到光盘上的文件中。有关详细信息，请参阅第322页的“保存程序”。3.如有必要，将文件复制到其他控制器可以访问的位置。4.有关将程序加载到虚拟控制器、FlexController或非运行系统上的系统的说明
To measure the process time
To measure the process time, follow these steps:
1. On the Simulation tab, click the Clock button.
2. Play the simulation or move along path.
The timer stops when the last process has stopped. If you start another process without
having deactivated the Clock button, the timer will continue.
3. To reset the clock to zero, click the Reset Process Timer.RAPID programs are normally stored in the systems that run on the virtual controllers of your
station. To copy programs to systems on other controllers, save the programs to file on the PC
and then load these files to the destination controllers. You can save either entire programs or
specific modules.
Copying a program
To copy a program from one controller to another, follow these steps:
1. In the Offline browser, select the controller that contains the program to copy.
2. Save the program to file on the disc. For details, see Saving a program on page 322.
3. If necessary, copy the files to a location that is accessible to the other controller.
4. For instructions on loading the program to a system on a virtual controller, a FlexController or a non-running system
