GE IC660BBD020电源模块
在响应中，您将获得操作的结果。错误或成功操作的结果如下所示：如果操作成功，则必须在从属设备上检查是否发生了切换。成功操作：SERVICE WAS SENT错误：执行功能时出错冗余切换功能仅适用于支持PNO从机冗余的从机。Errormemory此信息仅适用于发生错误的ABB服务工程师！如果您需要提供Errormemory，请始终将其作为文本文件而不是屏幕转储提供。最好使用“创建CI854服务文件”功能。可以启动“调试、DMJ缓冲区与调试”子菜单。该信息仅在发生错误时适用于ABB服务工程师！作为最有用的信息，这里提到了DMJ缓冲区。DMJ缓冲区是一个日志存储器，除了Errormemory之外，它非常有用
In the response you will get the result of the action. The result in case of an error or
a successful operation will be indicated as follows:
In case of a successful operation it has to be checked on the slave itself that the
switchover took place.
Successful operation: SERVICE WAS SENT
Error: Error performing function
The function Redundancy Switchover only works with slaves that support the
PNO slave redundancy.Errormemory
This information is of relevance only for the ABB service engineer in case of an
error!
