GE DS3820TIMC CPU电路板模块
否则，只显示错误代码。在这种情况下，您必须检查从属GSD文件中Channel_Diag的定义。该示例显示了S900模拟输入模块的当前错误代码31“HART通信错误”，该代码由S900 GSD文件中的条目Channel_Diag（31）=“HART通信误差”定义。SlaveConfig使用此功能获取从设备的当前加载配置和参数数据。在输入对话框中，输入要读取数据的从属设备的节点地址。按下“读取”按钮更新信息。在内容框中，为所选从设备显示下载到CI854/CI854A的参数和配置数据。此外，还显示了从设备中实际存在的配置数据。如果您在将从设备连接到DataExchange时遇到问题，请验证CI854/CI854A和从设备本身上的配置数据是否相同。在这种情况下，使用Control Builder M中的硬件配置验证从属设备上的硬件配置。
Otherwise only the error-code
will be presented. In this case you have to check the definitions for Channel_Diag in
the slave GSD-file. The example shows the current error code 31 "HART comm.
error" for the analog input module of S900 that is defined by the entry
Channel_Diag(31) = "HART comm. error" in the S900 GSD file.
SlaveConfig
Use this function to get the current loaded configuration and parameter data for the
slave device. In the input dialog enter the node address for the slave device you
would like to read the data for. Press the Read button to update the information.In the content frame the parameter and configuration data downloaded to
CI854/CI854A are presented for the selected slave. Also the configuration data
actual present in the slave unit are shown.If you have problems to get the slave into DataExchange, please verify that the
configuration data on CI854/CI854A and on the slave unit itself are identical. In
this case verify the hardware configuration on the slave itself with the hardware
configuration in Control Builder M.
