ABB GCC960C103 3BHE033067R0103模块
对于“设备诊断”的解释，您必须比较从属GSD文件中UnitDiagBit和UnitDiagArea的定义。使用“Ident diagnostic”（识别诊断），如果模块当前具有诊断数据，则每个模块都会显示其插槽编号。在上面的示例中，用数字1和9表示模块的诊断。在“通道诊断”中，列出激活的通道错误。每个错误用两行信息表示。第一行显示了一些一般信息。这些是模块的插槽编号、通道是输入或输出的方向、模块上的通道编号和通道类型。通道类型可以是例如字（模拟I/O）或位（二进制I/O）。第二行指定通道错误的类型。如果当前活动错误由PROFIBUS标准定义，则错误将显示正确的信息，如示例中所示的“电线故障”。
For the interpretation of “Device diagnostic” you have to compare the definitions
for UnitDiagBit and UnitDiagArea in the slave GSD-file.
With the “Ident diagnostic” each module is indicated with its slot number if the
module has currently diagnostic data. In the example above diagnostics are
indicated for the modules with the numbers 1 and 9.
With “Channel diagnostic” the active channel errors are listed. Each error is
indicated with two lines of information. The first line shows some general information. These are the slot number of the module, the direction if the channel is
an input or output, the channel number on the module and the type of the channel.
The channel type can be for example word (analog I/O) or bit (binary I/O). The
second line specifies the type of the channel error. If the current active error is
defined by the PROFIBUS standard then the error will be indicated with the correct
message like “Wire failure” as shown in the example.
