ABB 1TGE120010R1000DCS控制系统
打开FCI单元的HW编辑器，并在设置选项卡中配置冗余参数。删除从属单元的冗余如果从属单元已配置并以冗余模式运行，则可以删除冗余。1.右键单击要删除冗余的设备，然后选择冗余>删除备份。2.图标变为单个图标，文本中的备份位置被删除。3.打开FCI单元的HW编辑器，并在设置选项卡中配置冗余参数。插入新的从属类型要插入未随交付的硬件库提供的新从属类型，您可以选择以下选项：1。使用现有硬件定义文件如果您有一个经过验证的从属硬件定义文件，您可以创建自己的硬件库。右键单击硬件并选择新建库，然后定义新硬件库的名称。要插入硬件类型，请右键单击硬件类型，选择插入/替换硬件类型，然后通过将文件类型设置为HWD，从要插入的磁盘中选择现有硬件定义文件。（hwd）。硬件定义文件中定义的所有硬件类型将在新的硬件库中可用。
Open the HW editor for the FCI unit and configure the parameter for
redundancy in the settings tab.Delete Redundancy for Slave Unit
If the slave unit is already configured and running in redundant mode you can delete
redundancy.
1. Right-click on the unit you want to delete redundancy for and select
Redundancy > Delete Backup.
2. The icon changes to the single icon and the position for the backup is deleted in
the text.
3. Open the HW editor for the FCI unit and configure the parameter for
redundancy in the settings tab.Insert a new Slave Type
To insert a new slave type that is not provided with the delivered hardware libraries,
you have the following alternatives:
1. Use existing hardware definition file
If you have a proven hardware definition file for the slave, you can create your
own hardware library. Right-click Hardware and select New Library and define the name for your new hardware library. To insert the hardware types
right-click on Hardware types, select Insert/Replace Hardware Type(s) and
select the existing hardware definition file from the disk to be inserted by
having the filetype set to HWD.(hwd). All hardware types defined in the
hardware definition file will be available in the new hardware library.
