EMERSON KJ3102X1-BA1 DCS卡件
必须在BIOS中启用“传统USB支持”，以允许USB键盘/鼠标作为PS/2设备运行。必须在安装之前和Windows NTW 4.0运行期间启用此设置。有关更改BIOS设置的指南，请参阅第87页的“BIOS设置”。BIOS设置要启用/禁用传统USB支持和/或为USB控制器分配中断，请执行以下概述的相应操作：1。CPU通电或复位后，立即按F2键进入“PhoenixBIOS设置实用程序”。2.使用箭头键选择“高级”菜单。3.使用箭头键，选择“已安装O/S”设置。按数字键盘上的+或–，在“其他”、“Win95”和“Win98/Win2000”之间切换设置。4.使用箭头键，选择“将中断分配给USB”设置。按数字键盘上的+或–在“启用”和“禁用”之间切换设置。使用箭头键选择“传统USB支持”设置。按数字键盘上的+或–，在“启用”和“禁用”之间切换设置。6.按F10，然后按ENTER保存设置并退出BIOS。注：有关正确设置，请参见第86页的“在Microsoft Windows操作系统中使用USB键盘/鼠标”。
Legacy USB Support’ must be enabled in the BIOS to allow a USB keyboard/mouse
to operate as a PS/2 device. This setting must be enabled prior to the installation and
during the operation of Windows NTW 4.0. See “BIOS Setup” on page 87 for
guidelines on changing BIOS settings.BIOS Setup
To enable/disable Legacy USB Support and/or assign a interrupt to the USB
controllers, perform the appropriate actions as outlined below:
1. Immediately after the CPU has been powered on or reset, press F2 to enter the
‘PhoenixBIOS Setup Utility’.
2. Using the arrow keys, select the ‘Advanced’ menu.
3. Using the arrow keys, select the ‘Installed O/S’ setting. Press + or – on the
number keypad to toggle the setting between ‘Other’, ‘Win95’ and
‘Win98/Win2000’.
4. Using the arrow keys, select the ‘Assign Interrupt to USB’ setting. Press + or – on
the number keypad to toggle the setting between ‘Enabled’ and ‘Disabled’.Using the arrow keys, select the ‘Legacy USB Support’ setting. Press + or – on the
number keypad to toggle the setting between ‘Enabled’ and ‘Disabled’.
6. Press F10, then ENTER to save settings and exit the BIOS.
NOTE: See “Using USB Keyboard/Mouse with Microsoft Windows Operating
Systems” on page 86 for proper settings.
