FOXBORO FBM204 P0914SY变送器
映射了一个典型系统的配置可能性，该系统包括VMIVME-7750，带有一个驻留的闪存磁盘、一个连接到主IDE接口的硬盘驱动器和一个连接至软盘接口的软盘驱动器。主PCI IDE接口和辅助PCI IDE接口在Phoenix BIOS的集成外设设置屏幕中进行控制（启用或禁用）。在BIOS功能设置屏幕中选择第一引导设备。图3-1标识了分配给每个物理设备的驱动器号，并使用可引导设备在每个配置中以粗体字母表示设备引导。可引导设备是安装了操作系统的设备，或使用MS-DOS将其格式化为系统磁盘。功能性闪存磁盘的性能与标准IDE硬盘相同。对设备的读取和写入使用相同的方法，利用DOS命令行条目或驻留在所选操作系统中的文件管理器。
maps the configuration possibilities for a typical system consisting of the
VMIVME-7750 with a resident Flash Disk, a hard drive attached to the Primary IDE
interface, and a floppy drive attached to the floppy interface.The Primary and Secondary PCI IDE Interfaces are controlled (enabled or disabled) in
the Integrated Peripheral Setup screen of the Phoenix BIOS. The First Boot Device is
selected in the BIOS Features Setup screen.
Figure 3-1 identifies the drive letter assigned to each physical device, and indicates in
bold lettering the device booted from in each configuration, using devices that are
bootable. A bootable device is one on which an operating system has been installed,
or formatted as a system disk using MS-DOS.Functionality
The Flash Disk performs identically to a standard IDE hard drive. Reads and writes to
the device are performed using the same methods, utilizing DOS command line
entries or the file managers resident in the chosen operating system.
