EMERSON KJ4001X1-BA3胀差传感器
电池提供了七年的数据保留期，总结了所有实际数据使用周期。聪明的™ 因此，嵌入式计算假设通常不需要更换电池，例如，在长期处理备件的情况下。板/系统损坏锂电池的错误更换可能导致危险的爆炸。更换车载锂电池时，确保新旧电池型号完全相同。如果没有相应的电池型号，请联系您当地的SMART Embedded Computing销售代表，以获得官方认可的替代电池型号。数据丢失交换电池可能会导致时间设置丢失。备用电源可防止交换过程中数据丢失。快速更换电池可以节省时间设置。数据丢失如果电池电量不足或不足，RTC将被初始化。在实际使用电池七年之前更换电池。PCB和电池支架损坏使用螺丝刀拆卸电池可能会损坏PCB或电池支架。为防止损坏，请勿使用螺丝刀将电池从支架上拆下。
The battery provides data retention of seven years summing up all periods of actual data use. SMART™ Embedded Computing therefore assumes that there usually is no need to exchange the battery except, for example, in case of long-term spare part handling.Board/System Damage Incorrect exchange of lithium batteries can result in a hazardous explosion. When exchanging the on-board lithium battery, make sure that the new and the old battery are exactly the same battery models. If the respective battery model is not available, contact your local SMART Embedded Computing sales representative for the availability of alternative, officially approved battery models. Data Loss Exchanging the battery can result in loss of time settings. Backup power prevents the loss of data during exchange. Quickly replacing the battery may save time settings. Data Loss If the battery has low or insufficient power the RTC is initialized. Exchange the battery before seven years of actual battery use have elapsed. PCB and Battery Holder Damage Removing the battery with a screw driver may damage the PCB or the battery holder. To prevent damage, do not use a screw driver to remove the battery from its holder.
