EMERSON KJ3004X1-EA1现场总线接线板
默认VME设置出厂时，MVME7100具有通过Tsi148 VME控制器的全局环境变量（GEV）编程的以下VME配置。固件允许更改某些VME设置，以便用户自定义环境。以下是用户可更改的默认VME设置的说明。有关更多信息，请参阅附录B“相关文档”中列出的MOTLoad用户手册和Tundra的Tsi148用户手册。MVME7100>vmeCfg-s-m显示选定的默认VME设置-解释如下：VME PCI主设备启用[Y/N]=Y MVME7100>PCI主设备已启用。MVME7100>vmeCfg-s-r234显示选定的默认VME设置-解释如下：VMEbus主控制寄存器=0000000 3 MVME7100>VMEbus主机控制寄存器设置为默认（重置）状态。MVME7100>vmeCfg-s-r238显示所选的默认VME设置-解释如下：VMEbus控制寄存器=00000000 8 MVME7100
Default VME Settings
As shipped from the factory, the MVME7100 has the following VME configuration
programmed via Global Environment Variables (GEVs) for the Tsi148 VME controller. The
firmware allows certain VME settings to be changed in order for the user to customize the
environment. The following is a description of the default VME settings that are changeable
by the user. For more information, refer to the MOTLoad User’s Manual and Tundra’s
Tsi148 User Manual, listed in Appendix B, Related Documentation .
MVME7100> vmeCfg -s -m
Displaying the selected Default VME Setting
- interpreted as follows:
VME PCI Master Enable [Y/N] = Y MVME7100>
The PCI Master is enabled.
MVME7100> vmeCfg -s -r234
Displaying the selected Default VME Setting
- interpreted as follows:
VMEbus Master Control Register = 00000003
MVME7100>
The VMEbus Master Control Register is set to the default
(RESET) condition.
MVME7100> vmeCfg -s -r238
Displaying the selected Default VME Setting
- interpreted as follows:
VMEbus Control Register = 00000008
MVME7100
